Epson PowerLite 732c RGB, sRGB, Signal, ■Contrast, ■Sharpness, Color Temp, ■Brightness, ■Color Adjustment, ■Tint (video only), ■Color Intensity (video only)

■BrightnessLightens or darkens the overall image.■ContrastAdjusts the difference between light and dark areas.■Color Intensity (video only)Adjusts the color depth of the image.■Tint (video only)

Adjusts the balance of green to magenta in the image (available only for component video or NTSC signals).

■SharpnessAdjusts the sharpness of the image.■Color Adjustment

Adjusts the color temperature. Select Color Temp. to set a temperature between 5000 and 10000 °K. Or select RGB to adjust individual red, green, and blue values. (Not available if sRGB is selected as the Color Mode setting.)

note

The Brightness setting changes the opacity of the projector’s LCD panels. You can also change the lamp’s brightness. Select Brightness Control in the Setting menu, then choose High or Low (the default setting is High).

Adjusting Signal Settings

Although the projector normally detects and optimizes the input signal automatically, you can use the Signal menu to make manual adjustments. In addition to changing the position of the projected image, you can correct tracking and sync for computer images, or change the aspect ratio to widescreen format for video images.

1.Press the Menu button and select the Signal menu.

You see a screen similar to one of those below. (The settings will be different depending on the source you are projecting from.)

note

You can also use the remote control’s Auto button to automatically reset the projector’s tracking, sync, resolution, and position settings. See page 24 for details.

Computer/RGB Video Component Video Composite Video/S-Video

Fine-Tuning the Projector 49