Adjusting the Image

Once you see your image, you’ll need to make certain adjustments:

■To focus or zoom your image, see below.

■If only part of a computer image is displayed, you may need to press the Resize button. See page 25 for more information.

■If the image is too high or too low, you can reposition it. See page 25.

■If the image isn’t square, see page 26.

■If the projected image is flickering or “noisy,” see page 26.

Focusing and Zooming Your Image

Rotate the focus ring to sharpen the image.

focus ring

Rotate the zoom ring to reduce or enlarge the image.

zoom ring

If the image still isn’t large enough, you may need to move the projector farther away from the screen. You can also use the E-Zoombutton on the remote control to zoom in on a portion of the image. See page 33 for instructions.

24Using the Projector