3-6 Setting up the Printer with Your Computer
R4C4850
Setup Guide Rev.C
SETTING.FM A5 size
8/21/00
LProof Sign-off:
DAI A. Kobayashi K. Araki
K. Nishi
DAI K. Ramsey
6. Slide the interface card along the slots on both sides of the interface
compartment. Push it in firmly to fully insert the connecto r at the
rear of the interface card into the printer’s internal socket.
7. Secure the interface card in the slot with the two screws
included with the interface card.
8. Connect a compatible interface cable to the interface card and
to your computer. If the cable has a ground wire, secure it with
one of the screws.
9. Plug in the power cord.
Now see the next section to install the printer sof tware. If you use
your printer on a network, see also “Setting up Your Printer on a
Network” on page 3-14.
To remove an interface card, follow the above steps in the reverse
order.