Epson PS-500 quick start

Pulsense™ PS-500

Quick Start

Read these instructions before using your product.

Charge your product

Before using your product for the first time, make sure the

battery is fully charged. Charging takes approximately 2.5 to

3.5 hours. A full charge lasts about 36 hours.

Caution: Do not attach the charging cradle when the PS-500 is

wet. If the PS-500 is wet, wipe it with a damp cloth, remove the

moisture with a towel, then let it air dry before attaching the

charging cradle.

1. Open the charging cradle and insert the PS-500 as shown.

2. Insert the USB plug into a power source. You can use:

■Computer (using a free USB port)

■Optional USB AC Adapter (part number SFAC04)

The orange LED lights up when your PS-500 is connected

correctly. Charging is complete when the blue LED is lit.

Install Epson PULSENSE

View

Download Epson PULSENSE View from your mobile

device’s app store.

The following mobile devices are supported:

■iPhone 4s, iPhone 5, iPhone 5c, or iPhone 5s with iOS

7.1 or later

■Mobile device running AndroidTM 4.3 or later with

Bluetooth® Smart

Launch the app and pair your

PS-500

You must pair your PS-500 through the Epson PULSENSE

View app. The PS-500 will not store any data until you’ve

paired it with the app.

Follow these steps:

1. Start the Epson PULSENSE View app.

2. Make sure that the PS-500 is within 3 feet (1 meter) of the

mobile device.

3. Follow the on-screen instructions to pair your PS-500

with your mobile device and perform the initial

configuration.

The PS-500 can store up to 480 hours of data before needing

to be synced.

LED status

The LEDs on the PS-500 light up or flash to indicate different

states. When exercising, the LEDs indicate which zone you’re

currently in. The PS-500 vibrates when entering or leaving a

zone.

Wearing your PS-500

Keep these tips in mind when wearing your PS-500:

■The PS-500 needs to be worn snugly around the wrist to

collect more accurate heart rate data. This may cause a

slight impression on the wrist. Adjust the PS-500 for the

comfort and performance you choose.

■When wearing the PS-500, make sure it does not touch

the ulna bone.

■For greater accuracy, wear the PS-500 on your

non-dominant wrist.

■Tap the watch face to turn on the backlight.

■Before boarding an aircraft, power off your PS-500 by

selecting Power off from the System settings menu.

Calibrating your heart rate

To personalize your heart rate zones and calibrate the sleep

monitoring feature, wear your PS-500 for 2 to 7 days while

you sleep. The accuracy of your heart rate zone and sleep data

will improve after the PS-500 has calibrated your resting heart

rate.

Using PULSENSE View

You can view live and collected data, such as heart rate, steps,

calories, and sleep, from your PS-500 using the PULSENSE

View mobile app.

If you do not have a mobile device, you can use your

Windows computer to upload data to the PULSENSE View

web application. Download the PS Uploader software

(Windows 8.x, Windows 7, or Windows Vista required) from

epson.com/support/ps500 (U.S.) or epson.ca/support/ps500

(Canada).

■The PS-500 vibrates when entering or leaving a zone. To

turn off vibration, go to > Device Settings >

Vibration in the PULSENSE View app. See the in-app

help for more information about vibration.

■If you are missing data, note that data collected before

pairing with the app cannot be viewed.

■If you are having trouble pairing, make sure you are

pairing from the PULSENSE View app, not from your

system’s Bluetooth settings.

■If heart rate monitoring is turned off, press the A button

to turn it back on.

■The PS-500 time is set by the PULSENSE View app or

the PS Uploader software. Connect the PS-500 to one of

these programs to update the time.

Where to get help

Internet support

Visit epson.com/support/ps500 (U.S.) or

epson.ca/support/ps500 (Canada) for solutions to common

problems. You can get tips, usage information, and FAQs,

download utilities, view the User’s Guide, or e-mail Epson.

Telephone support services

Call (562) 276-4394 (U.S.) or (905) 709-3839 (Canada).

Support hour s are 6 AM to 8 PM, Pacific Time, Monday

through Friday, and 7AM to 4 PM, Pacific Time, Saturday.

Days and hours of support are subject to change without

notice. Toll or long distance charges may apply.

Notices

Safety instructions

WARNING:

■Exercise according to your physical capabilities.

■Stop exercising and consult your doctor if you feel unwell

during exercise.

■This product is not intended for use to diagnose, prevent, or

treat disease or other conditions, and is not a medical

device.

■If you have any concerns, consult your doctor before using

this product.

■To avoid the possibility of skin irritation or discomfort from

wearing the PS-500, you must keep the skin under the band

clean and dry at all times. Do not allow water, sweat, dead

skin, or dirt to build up under the band. It is important to

keep the band clean and dry at all times by wiping the band

with a damp cloth, removing the moisture with a towel, and

letting it air dry.

■Stop using the PS-500 immediately if you have an allergic

reaction to the band. Please consult your doctor if you

develop a rash or skin irritation.

■Remove the band from the wrist when recharging the

battery.

■Do not use or store this product in the following

environments: locations with very high or low temperatures

or humidity, near volatile substances, dusty places, or near

strong magnetic fields (for example, near a loudspeaker).

Doing so may cause electric shock, fire, or the product may

malfunction or be damaged.

■Do not disassemble this product, and do not attempt to

repair it by yourself. It may cause an electric shock or

accident.

■Do not leave this product within reach of young children.

Caution:

■Although the PS-500 is water-resistant, do not pour water

directly onto this product or submerge it in water. This can

compromise the water-resistant feature and cause the

product to fail.

■Do not wear the PS-500 in a bath, shower, sauna, or

steamroom. Steam and soap can compromise the water-

resistant feature and cause the product to fail.

■Do not use the charging cradle, AC adapter, or USB cable if

they are damaged, faulty, or contaminated by foreign

material such as dust, water, or dirt.

■Do not use any adapter other than the specified adapter for

charging.

Declaration of Conformity

According to 47CFR, Part 2 and 15, Class B Personal Computers and

Peripherals; and/or CPU Boards and Power Supplies used with Class B

Persona l Com puter s:

We: Eps on A meri ca, Inc.

Located at: 3840 Kilroy Airport Way, MS 3-13, Long Beach, CA 90806

Telephone: (562) 981-3840

Declare under sole responsibility that the product identified herein,

complies with 47CFR Part 2 and 15 of the FCC rules as a Class B digital

device. Each product marketed, is identical to the representative unit

tested and found to be compliant with the standards. Records maintained

continue to reflect the equipment being produced can be expected to be

within the variation accepted, due to quantity production and testing on

a statistical basis as required by 47CFR §2.909. Operation is subject to

the following two conditions: (1) this device may not cause harmful

interference, and (2) this device must accept any interference received,

including interference that may cause undesired operation.

Trad e N am e: Ep so n

Type of Product: Heart Rate Activity Monitor

Model: PS-500

Marketing Name: Pulsense PS-500

FCC/IC Notices

FCC ID: BKMAP004

CAN ICES-3(B)/NMB-3(B)

IC: 1052F-AP004

This transmitter must not be co-located or operated in conjunction with

any other antenna or transmitter.

This device complies with Part 15 of FCC Rules and Industry Canada

licence-exempt RSS standard(s). Operation is subject to the following

two conditions: (1) this device may not cause interference, and (2) this

device must accept any interference, including interference that may

cause undesired operation of this device.

Caution: Changes or modifications not expressly approved by the party

responsible for compliance could void the user’s authority to operate the

equipment.

This equipment complies with FCC/IC radiation exposure limits set

forth for an uncontrolled environment and meets the FCC radio

frequency (RF) Exposure Guidelines and RSS-102 of the IC radio

frequency (RF) Exposure rules. This equipment has very low levels of RF

energy that are deemed to comply without testing of specific absorption

ratio (SAR).

Note: This equipment has been tested and found to comply with the

limits for a Class B digital device, pursuant to part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against

harmful interference in a residential installation. This equipment

generates, uses and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause

harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If

this equipment does cause harmful interference to radio or television

reception, which can be determined by turning the equipment off and

on, the user is encouraged to try to correct the interference by one or

more of the following measures:

■Reorient or relocate the receiving antenna.

■Increase the separation between the equipment and receiver.

■Connect the equipment into an outlet on a circuit different from

that to which the receiver is connected.

■Consult the dealer or an experienced radio/TV technician for help.

Epson America, Inc., 3840 Kilroy Airport Way, Long Beach, CA 90806,

Tel:(562) 981-3840

Epson America, Inc. Limited Warranty

One-Year Limited Warranty

What Is Covered: Epson America, Inc. (“Epson”) warrants to the original

retail purchaser of the Epson product enclosed with this limited warranty

statement that the product, if purchased new and operated in the United

States, Canada, or Puerto Rico will be free from defects in workmanship

and materials for a period of one (1) year from the date of original

purchase. For warranty service, you must provide proof of the date of

original purchase.

What Epson Will Do To Correct Problems: If your product requires

service during the limited warranty period, please call the Epson

ConnectionSM at the number on the bottom of this statement and be

prepared to provide the model, serial number, and date of original

purchase. An Epson service technician will provide telephone diagnostic

service to determine whether the product requires service. If service is

needed, Epson will, at its option, repair or replace the defective unit,

without charge for parts or labor. When Epson authorizes an exchange

for the defective unit, Epson will ship a replacement product to you,

freight prepaid, so long as you use an address in the United States,

Canada, or Puerto Rico. You are responsible for securely packaging the

defective unit and returning it to Epson within five (5) working days of

receipt of the replacement. Epson requires a debit or a credit card number

to secure the cost of the replacement product in the event that you fail to

return the defective one. When warranty service involves the exchange of

the product or of a part, the item replaced becomes Epson property. The

exchanged product or part may be new or refurbished to the Epson

standard of quality, and at Epson’s option, the replacement may be

another model of like kind and quality. Epson’s liability for replacement

of the covered product will not exceed the original retail selling price of

the covered product. Exchange or replacement products or parts assume

the remaining warranty period of the product covered by this limited

warranty.

What This Warranty Does Not Cover: This warranty covers only

normal use in the United States, Canada, or Puerto Rico. This warranty

does not cover normal wear and tear; including nicks and scratches, and

battery life, unless the damage was caused by a manufacturing defect in

materials and workmanship. This warranty does not cover damage caused

by parts or services not manufactured, distributed, or certified by Epson

nor any losses attributable to the loss or restoration of customer data.

This warranty does not cover misuse caused by high impact wear or

damage caused by exposure to water as specified in the product user

manual. This warranty is not transferable. Software is not covered under

this warranty. See the Epson Pulsense Website for software warranties.

Epson is not responsible for warranty service should the Epson label or

logo or the rating label or serial number be removed. Epson is not

responsible for warranty service should the product fail to be properly

maintained or fail to function properly as a result of misuse, abuse,

improper installation, neglect, improper shipping, damage caused by

disasters such as fire, flood, and lightning, improper electrical current,

software problems, interaction with non-Epson products, or service other

than by Epson or an Epson Authorized Servicer. Postage, insurance, or

shipping costs incurred in presenting your Epson product for carry-in

warranty service are your responsibility. If a claimed defect cannot be

identified or reproduced in service, you will be held responsible for costs

incurred.

DISCLAIMER OF WARRANTIES: THE WARRANTY AND

REMEDY PROVIDED ABOVE ARE EXCLUSIVE AND IN LIEU

OF ALL OTHER EXPRESSED OR IMPLIED WARRANTIES

INCLUDING, BUT NOT LIMITED TO, THE IMPLIED

WARRANTIES OF MERCHANTABILITY, FITNESS FOR A

PARTICULAR PURPOSE AND NON-INFRINGEMENT. UNLESS

STATED HEREIN, ANY STATEMENTS OR REPRESENTATION

MADE BY ANY OTHER PERSON OR FIRM ARE VOID.

Remedies: Your exclusive remedy and Epson’s entire liability for a

material breach of this Agreement will be limited to a refund of the price

paid for the Epson products covered by this Agreement. Any action for

breach of warranty must be brought within 3 months of the expiration

date of the warranty. Epson is not liable for performance delays or for

nonperformance due to causes beyond its reasonable control. Except as

provided in this written warranty, neither Epson nor its affiliates shall be

liable for any loss, inconvenience, or damage, including direct, special,

incidental or consequential damages, including lost profits, cost of

substitute equipment, downtime, claims of third parties, including

customers, or injury to property, resulting from the use or inability to use

the Epson products, whether resulting from a breach of warranty or any

other legal theory. Some jurisdictions do not allow limits on warranties or

remedies for breach in certain transactions. In such jurisdictions, the

limits in this paragraph and the preceding paragraph may not apply.

In Canada, warranties include both warranties and conditions.

Arbitration, Governing Laws: Any disputes arising out of this

Agreement will be settled by arbitration to be conducted before a single

arbitrator in Los Angeles, California, in accordance with the commercial

Arbitration Rules of the American Arbitration Association, and judgment

upon the award rendered by the arbitrator may be entered in any court

having jurisdiction thereof. This Agreement shall be construed in

accordance with the laws of the State of California, except this arbitration

clause which shall be construed in accordance with the Federal

Arbitration Act.

To find the Epson Authorized Reseller nearest you, please visit our

website at: epson.com.

To find the Epson Customer Care Center nearest you, please visit

epson.com/support.

To contact the Epson Connection, please call (562) 276-4394 in the U.S.

and (905)709-3839 in Canada or write to Epson America, Inc., P.O.

Box 93012, Long Beach, CA 90809-3012.

EPSON is a registered trademark, EPSON Exceed Your Vision is a

registered logomark, and Pulsense is a trademark of Seiko Epson

Corporation. Epson Connection is a service mark of Epson America, Inc.

iPhone is a trademark of Apple Inc., registered in the U.S. and other

countries.

General Notice: Other product names used herein are for identification

purposes only and may be trademarks of their respective owners. Epson

disclaims any and all rights in those marks.

This information is subject to change without notice.

Printed in Japan

Pays d’impression : Japon

App icon Meaning

No network connection. Make sure you have a

network or data connection, then tap the icon to

reconnect.

No Bluetooth connection. Make sure Bluetooth is

enabled on your product and mobile device, then tap

the icon to reconnect.

Light pattern Status

Heart rate is below the fat burning

zone

Heart rate is approaching the fat

burning zone

Heart rate is in the fat burning zone

Heart rate is in the aerobic exercise

zone

Heart rate is in the anaerobic

exercise zone

Heart rate is above the anaerobic

exercise zone (flashing rapidly)

Ulna bone

Settings Swipe down for live

heart rate

Refresh

Swipe left/

right for data

overview

Show data

details

Enter data

Watch screen overview

Press the B button to cycle through the measurement screens.

Tap the watch face repeatedly to access the settings screens.

B button

A button