Epson Stylus Photo R220
Follow the steps in these sections to print on CDs or DVDs:
Cleaning the Rollers
Before you print on CDs or DVDs, it’s a good idea to clean the rollers inside your printer. You can do this by feeding and ejecting several sheets of plain paper.
1.Make sure your printer is turned on and several sheets of
2.Press the ) button to feed a sheet of paper into the printer.
3.Press the ) button again to eject the paper.
4.Repeat steps 2 and 3 several times.
Inserting a CD or DVD
Make sure the data, music, or video is burned on your ink
If you want to check the print position or color, see your Printer Basics book.
Before you insert a CD or DVD, make sure the printer is turned on. Otherwise, the disc may not be positioned correctly. Then follow these steps:
1.Push in the output tray extension, but leave the tray open.
2.Open the printer cover and pull down the CD/DVD tray guide.
3.Place the CD or DVD on the CD/DVD tray with the white or printable side
To print on a small CD
Caution: Make sure you always use the small CD ring when printing on
Always use this ring with 8 cm CDs
4.Insert the tray carefully, making sure it’s level, not tilted up or down. Push the tray under the tab and the two rollers. Don’t push the tray in too far and make sure that the arrows line up exactly.
5.Follow the instructions in “Printing Your Design” on page 8 to print with Epson Print CD.
Designing CDs and DVDs
You can use the Epson Print CD program (included on the Printer Software
6/05 | Epson Stylus Photo R220 - 7 |