Epson R2880 4 Load paper, Sheet feeder, Rear Manual feed slot

You can load plain paper, and most glossy and matte papers, in the sheet feeder.

1 Open the paper support and pull up the extensions.

2 Open the output tray and pull out the extensions.

3 Load paper against the right edge and behind the tab. Then squeeze the edge guide and slide it to the edge of the paper.

Note: Don’t load the paper sideways. Always load it short edge first.

You can print on these paper types using the single sheet guide and the rear manual feed slot:

•Epson Velvet Fine Art Paper

•Epson Watercolor Paper Radiant White

•Epson UltraSmooth® Fine Art Paper 325 gsm

•PremierArt™ Matte Scrapbook Photo Paper for Epson

•Epson Exhibition Fiber Paper

Remove any paper from the sheet feeder and close the paper support.

Make sure the output tray is open and the extensions are pulled out.