EPSON Stylus Photo R300 Series
Loading CDs and DVDs
Follow these steps to load CDs and DVDs in your printer.If you don’t insert the CD/DVD tray correctly, you may damage the printer or tray.
1.Lift the printer lid and push in the output tray extension, then lower the CD/DVD tray guide.
Lower tray guide
2. Place the CD or DVD on the tray, making sure the disc lays flat in the tray.3.Insert the tray carefully, making sure it is level, not tilted up or down.Push the tray under the tab and the two rollers.Don’t push in the tray too far; line up the arrows exactly.Tab
Arrows
Keep tray level
See the User’s Guide for more information on printing CDs and DVDs.Printing Without a Computer
Your EPSON Stylus Photo R300 Series printer can print photos stored:❏On a memory card (see below)❏In a digital camera (see page 6)❏On a data storage device, such as a
However your photos are stored, make sure the image files meet these requirements:
❏JPEG files or uncompressed Tiff files only❏The file storage device should comply with DCF (Design rule for Camera File systems) Version 1.0
❏Resolutions ranging from 160 × 160 to 4600 × 4600 pixels❏No more than 999 images (although you may have additional images on your card or storage device, the printer can read only the first 999)
Inserting a Memory Card
Your printer works with many types of memory cards. Follow these guidelines to insert your memory card:
1.Make sure the printer is turned on, open the memory card cover, then insert the memory card into the appropriate slot, as shown:
CompactFlash™ | Memory Stick®, | SmartMedia™ or |
or Microdrive™ | SD (Secure Digital), or | xD Picture Card |
(left) | MMC (MultiMediaCard) | (right) |
| (middle) |
|
After a moment, the printer reads and counts the number of images on your card. When it’s done, your images are available for printing.
Insert just one card at a time. The printer can’t read multiple cards at once.
10/03 | EPSON Stylus Photo R300 Series - 5 |