Epson RS-232 4

15. Press the HDMI button on the projector remote to select HDMI as the input source.

Color Mode

Aspect

HDMI

16.Press the Color Mode button. Use the u and d buttons to select Natural, then press

Select.

17.Press the Aspect button. Use the u and d buttons to select Through, then press Select.

18.Follow the instructions in the video processor User Manual to make any additional adjustments.

Note: Because the video processor is ISF-certified, you must connect it to a laptop computer to perform the final color calibrations using the software utility supplied with the video processor. See the video processor Service Manual for instructions.

If you wish to program a universal remote control to work with the projector, you can obtain a list of projector IR control codes from the Epson web site at http://support.epson.com.

All rights reserved. No part of this document may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording, or otherwise, without the prior written permission of Epson America, Inc. This publication and the features described herein are subject to change without notice.

Trademarks

Epson is a registered trademark and Exceed Your Vision is a trademark of Seiko Epson Corporation. PowerLite is a registered trademark of Epson America, Inc.

General Notice: Other product names used herein are for identification purposes only and may be trademarks of their respective owners. Epson disclaims any and all rights in those marks.

CPD-22348