1.Remove any inserted memory card from the RX595 Series.
2.Connect the USB cable that came with your camera to the EXT. I/F USB (PictBridge) connector on the front of your RX595 Series.
3.Turn on your camera. You see a connection message on the RX595 Series display screen.
4.Load Epson photo paper. See page 7 for a list.
5.Press the Setup button.
6.Press l or r to select PictBridge Setup, then press OK.
7.Select your paper type or other print settings, turn on red eye reduction or other features, and press OK. (See the
Note:
For the best quality printing, make sure the Enhance setting is set to PhotoEnhance (also known as Auto Photo Correction). This automatically analyzes your photos and, if necessary, adjusts the brightness, contrast, and saturation. PhotoEnhance uses a sophisticated face recognition technology to optimize photos that include faces. For this to work, both eyes and the nose must be visible in the subject’s face. If your photo includes a face with an intentional color cast, such as a bronze statue, you may want to turn off PhotoEnhance to retain the special color effects.
8.Follow the instructions that came with your camera to select your photos and print them.
20Printing From a Memory Card, Camera, or Other Device