
2-16 Using EPSON Photo!3
LProof Sign-off:
E. Omori _______
M. Fujimori _______
K. Pipa _______
EPSON Photo!3
Rev. C3
A5 size CHAP2.FM
9/8/99 Pass 0
1. Make sure to open the lens cover and turn the
camera’s dial switch to or .
2. Position the camera facing the subject. Use a
tripod for maximum flexibility in setting up your
shots.
3. Click the Take a Picture button to take a picture.
The status and shooting lights flash green, then
turn off.
4. When the light stops flashing and turns green, the
image is saved and you can take another picture.
When you want to take picture while displaying your
image in the Live Preview window, click the Start
button in the Live Preview box. Then click Take a
Picture button to take a picture.
Note:
❏The live preview feature consum es much battery
power, so use of the optional A C adapter is
recommended. See your Phot oPC 800 User's Guide for
more information on using the AC adapter.
❏You cannot turn off the camera when you are using live
preview. Click the Stop button to turn off the live
preview feature, and then turn off the c a mera.
The live preview image will be updated every few
seconds for the amount of time specified in the Auto-
Stop Timer list as follows:
30 Seconds, 1 Minute (default setting),
3 Minutes, 5 Minutes
This feature helps save battery power. You can also
quit the live preview by clicking the Stop button while
live previewing.
Erasing photos from your computerYou can erase the last photo taken or all the photos in
the camera’s memory card.
To erase the photo you take the last, click the Erase
Last button.
To erase all the photos in your camera, click the Erase
All button.
A message appears asking you to confirm your
command. Click Yes to erase, or No to cancel.