Epson SD-DSPUSBB manual Epson Powered USB Module, Standard Interface Module, Module Specifications

		Standard Interface Module
Epson Powered USB Module
Module Specifications
USB Specifiations	USB Specification 1.1
Speed	USB full-speed mode 12 Mbps (bps: bits per second)
Type	USB bulk transfers
Power	USB self-powered function device
Bus current (+5V)	0 mA (All power is supplied from the TM series printer)
USB packet size	USB bulk OUT (TM) 8 bytes
	USB bulk IN (TM) 64 bytes
Max Cable length	3.8m (12.5 feet or shorter)

Power Supply	Rated voltage for +5 V line
Specifications	Rated voltage for +24 V line
	Current consumption for +24 V line

Conforms to the USB standard 24 VDC ±5%

Depends on the TM printer into which the Connect-It is installed.

The Powered USB module can be installed in an Epson printer in less than a minute with no special tools.

The Powered USB module provides clean cable management, using only one cable for both power and data.

Epson America, Inc. • 3840 Kilroy Airport Way • Long Beach, CA 90806 • (562) 290-5304 • http://pos.epson.com

© 2005 Epson America, Inc. Epson is a registered trademark of Seiko Epson Corporation. Connect-It is a trademark of Epson. All other trademarks are the property of their respective owners. Specifications are subject to change without notice.

SD-DSPUSBB