EPSON
4.First Aid Measures4.1Eyes: Immediately flush with room temperature, low pressure, clean water for at least 15 minutes. Seek medical attention if eye irritation continues.
4.2Skin: Wash surface areas with soap and water. Wash soiled clothing before rewearing. Seek medical attention if irritation continues.
4.3Inhalation: Remove subject to ventilated fresh air. Consult physician if necessary.
4.4Ingestion: Seek medical attention if stomach continues to be upset.
5.Fire Fighting Measures5.1Flammability:Flash point is greater than 248 deg. F / 120 deg. C (closed cup in accordance with ASTM D3278)
5.2Extinguishing Media: Dry chemical or carbon dioxide
5.3Fire Fighting Instructions: No special fire fighting procedures are required other than breathing apparatus. No special explosion hazards are known.
6.Accidental Release MeasuresIf a spill occurs, use sponges to
Keep out of reach of children and do not drink ink. Do not store the cartridge in high or freezing temperatures. Keep cartridge out of direct sunlight. Do not dismantle cartridge. Do not store cartridges with oxidizing agents or explosives. Make sure cartridge is dry before insertion into printer housing.
8.Exposure Controls and Personal Protection8.1 Engineering Controls: None required
8.2 Exposure Controls: | None required |
8.3Personal Protection: None required when cartridges are used as intended
9.Physical and Chemical Properties of Ink FormulationAppearance: | Magenta Liquid |
Odor: | None |
pH: | 9.0 – 10.0 |
Boiling point: | Approximately 212 deg. F / 100 deg. C |
Freezing point: | Less than 32 deg. F / 0 deg. C |
Melting point: | Less than 32 deg. F / 0 deg. C |
Flash point: | Greater than 248 deg. F / 120 deg. C (closed cup, ASTM D3278) |
Autoflammability: | None |
Explosive properties: | None |
MSDS # T605B00 | Version 3.53 (USA) |
Page 2 of 4 | Release Date 11/2007 |