6
English
Setup

Installing the Printer

Install the printer horizontally on a flat surface.
As shown in the illustration, install the printer with a maximum tilt of 3°. Installing the printer with
a tilt of more than 3° may cause the following problems.
•Roll paper near end cannot be detected.
•The roll paper cover will not close after installing roll paper.
•Roll paper cannot be taken out.
Also, fix the printer so that it does not move around when you open/close the roll paper cover and
cut roll paper.

Q

Note:
A tape for fixing the printer (DF-10) is available as an option.
Maximum tilt of 3°