Epson TM-T88III Series Kanji Control Commands, FS ! n, Bit Off/On Hex Decimal Function

Confidential

6.4 Kanji Control Commands

(for Japanese model, Simplified Chinese model, Traditional Chinese model, and Korean model)

FS ! n

[Name]		Set print mode(s) for Kanji characters
[Format]		ASCII			FS		!	n
		Hex			1C		21	n
		Decimal			28		33	n
[Range]		0 ≤	n ≤ 255
[Description] Sets the print mode for Kanji characters, using n as follows:
	Bit			Off/On		Hex	Decimal		Function
	0			-		-	-		Undefined.
	1			-		-	-		Undefined.
	2			Off		00	0		Double-width mode is OFF.
				On		04	4		Double-width mode is ON.
	3			Off		00	.		Double-height mode is OFF.
				On		08	8		Double-height mode is ON.
	4			-		-	-		Undefined.
	5			-		-	-		Undefined.
	6			-		-	-		Undefined.
	7			Off		00	0		Underline mode is OFF.
				On		80	128		Underline mode is ON.
[Notes]		• When both double-width and double-height modes are set (including right- and left-side
			character spacing), quadruple-size characters are printed.
		• The printer can underline all characters (including right- and left-side character spacing), but
			cannot underline the space set by HT and 90° clockwise-rotated characters.
		• The thickness of the underline is that specified by FS − , regardless of the character size.
		• When some of the characters in a line are double or more height, all the characters on the
			line are aligned at the baseline.
		• It is possible to emphasize the Kanji character using FS W or GS !, the setting of the last
			received command is effective.
		• It is possible to turn under line mode on or off using FS − , and the setting of the last received
			command is effective.
[Default]		n = 0
[Reference]		FS − , FS W, GS !

EPSON	TITLE	TM-T88IIIseries	SHEET	NO.
			REVISION
		Specification
				NEXT	SHEET
		(STANDARD)	B
				146	145