Epson WF-3530, C11CC33201, WF-3520 Cannot Scan Over a Network, Printing a Network Status Sheet

Cannot Scan Over a Network

If you cannot start Epson Scan for scanning over a network, try these solutions:

• If you are scanning a large original at a high resolution, a network communication error may occur. Try

scanning again at a lower resolution.

• If network communication was interrupted while starting Epson Scan, exit Epson Scan, wait a few

seconds, and restart it. If Epson Scan cannot restart, turn off your product, turn it back on, and try

restarting Epson Scan again.

• Check the connection setting and test the connection using Epson Scan Settings:

Windows 8: Navigate to the Start screen and select EPSON Scan Settings. Make sure the

Connection setting is set to Network, then click the Test button.

Windows (other versions): Click or Start >All Programs or Programs >EPSON >EPSON

Scan >EPSON Scan Settings. Make sure the Connection setting is set to Network, then click the

Test button.

Mac OS X: Open the Applications folder, click Epson Software, and click EPSON Scan Settings.

Make sure the Connection setting is set to Network, then click the Test button.

• Make sure the option selected as the Timeout Setting in the Epson Scan Settings program is long

enough to complete scanning over a network.

• You may need to disable the firewall and any anti-virus software on your wireless router or access

point.

Note: With Mac OS X 10.6, 10.7, or 10.8, in addition to scanning with Image Capture, you can download

and install Epson Scan scanning software. Epson Scan provides additional image adjustment and photo

correction features for enhancing scanned images, and provides an interface for TWAIN-compliant OCR

scanning software, such as ABBYY FineReader. To download Epson Scan, visit Epson's driver

download site (U.S. downloads or Canadian downloads).

Parent topic: Solving Network Problems