Before installing the refrigerator/freezer

1. Before installing the refrigerator/freezer

Be sure that the appliance is undamaged. Report any shipping damage to your dealer immediately.

Wash the cabinet and interior with a mild unscented detergent and wipe dry. Do not use abrasive scouring powder, still wool or similar cleaning agents.

Connecting the electrical supply: see section (7) and (8).

2. How to use the appliance

Control panel: See fig. (1) page 7.

1. Refrigerator light

2. Thermostat knob for refrigerator section

3. Thermostat knob for freezer section

4. The control lamp emits a green light, when the power is on

5. The control lamp emits a yellow light, when the fast-freeze switch is activated

6. Deep-Freeze button

7. Thermometer for freezer section

8. The control lamp emits a red light/ flashes red, when the temperature is too high. The control lamp might emit a red light or flash during the freezing process - this is normal

The thermostat is adjustable from 0 (off) to 7 (coldest). It is recommended that you set the thermostat to position 4 when you first use it, then adjust the temperature as needed until the desired temperature is achieved.

The refrigerator section

Never store hot food in the cabinet. Remember to always wrap or place food in sealed containers before placing into refrigerator.

The evaporator section of the refrigerator defrosts automatically. The melted ice flows into a tray on top of the compressor where it evaporates.

The freezer section

Control Panel. See fig. (1) page 7.

Deep-Freeze: Push the button (6). The

yellow light will turn on and the deep- freezing process begins. Push the button

(6)again when the food is frozen solid, and the yellow light will turn off. Deep-freezing more than 6 1/2 pounds of food will require approximately 24 hours.

It is important that the deep-freezing takes place as quickly as possible. Therefore, food should be at room temperature when placed in freezer.

Consult a manual or handbook to find out the best procedures and packaging materi- als for deep-freezing.

Food should be arranged to allow maximum contact with the freezing shelf. Open the door only when necessary. The alarm light, fig. (1) page 7 indicates when the alarm is on. If the light is on, the alarm will sound if the temperature is too high.

Please note that the ice cubes, if consumed immediately after removal from the freezer, may result in freezer-burn. Ice cubes should be allowed to warm slightly before con- sumption.

Defrosting

Items in the freezer will cause frost to form. A thin layer of frost does not affect the performance of the freezer.

Loose frost may be removed carefully with a plastic or wooden scraper. Never use a knife or other sharp tools. When the layer of frost on the shelves is 1/4" - 1/2" thick, the freezer should be defrosted.

Note: The layer of frost on the front edge of the top-freezing shelf may grow slightly thicker.

To Defrost:

Turn off the freezer.

Remove food and wrap in newspaper, a blanket or similar insulating material and store them in as cold a place as possible.

Place a bowl of hot, but not boiling, water in the freezer.

Unfold the drain spout, attach the enclosed extension and place a bowl under it, fig. (3) page7.

Wipe out the cabinet with a towel or dry cloth when the frost has melted.

CRF 1200 W, CRF 1200 S, CRF 1200 B specifications

The Equator CRF 1200 series represents a remarkable leap in the realm of modern utility vehicles, combining advanced technology with versatility and performance. The line includes three notable variants: the CRF 1200 B, CRF 1200 S, and CRF 1200 W, each designed to cater to different user needs while maintaining a standard of excellence.

The CRF 1200 B emphasizes robust performance and reliability, making it an ideal choice for individuals and businesses that require a dependable workhorse. This model is equipped with a powerful engine that delivers impressive torque, ensuring that it can handle heavy loads and challenging terrains with ease. Advanced suspension technology enhances stability, allowing for a smooth ride even on rough surfaces. The CRF 1200 B also features an efficient fuel management system that optimizes fuel consumption without compromising on power, making it both economical and environmentally friendly.

In contrast, the CRF 1200 S is tailored for those who prioritize comfort and luxury during their rides. It boasts a spacious and ergonomically designed interior, featuring high-quality materials and advanced infotainment options. The user-friendly interface integrates seamlessly with smartphones and other devices, providing access to navigation, music, and more. Safety is paramount in the CRF 1200 S, with cutting-edge technologies including adaptive cruise control, lane departure warnings, and high-performance braking systems, ensuring that both driver and passengers are protected on their journeys.

The CRF 1200 W, on the other hand, is crafted for adventurous spirits who crave off-road experiences. This model is equipped with all-terrain tires and a higher ground clearance, allowing it to tackle steep inclines, rocky paths, and muddy trails without difficulty. Its robust chassis and enhanced traction control systems enable it to navigate a variety of environments, making it perfect for outdoor enthusiasts and explorers. The vehicle is also fitted with waterproof features and durable materials, ensuring longevity even in the harshest conditions.

Together, the Equator CRF 1200 B, CRF 1200 S, and CRF 1200 W offer a blend of power, comfort, and versatility. Whether for work, leisure, or adventure, these vehicles cater to diverse lifestyles while standing out for their innovative technologies and impressive characteristics. With options that range from robust utility to luxurious comfort and off-road capabilities, the CRF 1200 series sets a new standard in the utility vehicle market.

Equator CRF 1200 B warranty Before installing the refrigerator/freezer, How to use the appliance

Models: CRF 1200 W CRF 1200 S CRF 1200 B