Equinox Systems ZyAIR G-200 4.3Problem with the Link Status, 4.4The ZyAIR Does Not Respond, Table 4-4Troubleshooting the ZyAIR, Table 4-3Troubleshooting Link Quality

ZyAIR G-200 User’s Guide

Table 4-2 Troubleshooting Communication Problems

PROBLEM CORRECTIVE ACTION

B.Ad-Hoc (IBSS) Verify that the peer computer(s) is turned on.

Make sure the ZyAIR and the peer computer(s) are using the same SS ID and channel.

Make sure that the ZyAIR and the peer computer(s) share the same security option and key.

Change the wireless clients to use another radio channel if interference is high.

Make sure that the ZyAIR and the peer computer(s) share the same security option and key. Verify the settings in the Security Configuration screen.

4.3Problem with the Link Status

Table 4-3 Troubleshooting Link Quality

PROBLEM	CORRECTIVE ACTION
The link quality and/or signal	Search and connect to another AP with a better link quality using the Site
strength is poor all the time.	Survey screen.
	Move your computer closer to the AP or the peer computer(s) within the
	transmission range.
	There is too much radio interference (for example microwave or another
	AP using the same channel) around your wireless network. Relocate or
	reduce the radio interference.

4.4The ZyAIR Does Not Respond

	Table 4-4 Troubleshooting the ZyAIR
PROBLEM	CORRECTIVE ACTION
The ZyAIR connected	When you resume your computer from sleep/standby/suspend mode, the
to a computer does not	ZyAIR may not work or immediately respond.
respond after resuming	If this happens, disconnect and connect the ZyAIR.
the computer from
sleep mode.

4-2 Troubleshooting