USB hub | Ergotron A515 instruction

A515BACK

15" TFT LCD Color Monitor

USB hub

NEXT

The USB hub(Bus-powered mode hub) have 1 upstream port and 2 downstream ports. The upstream port can be connected to the root hub of host PC or other downstream port. Two(2) downstream ports allow to connect another USB device such as USB mouse, joystick, printer etc.

1)The maximum supply current of downstream port is 100mA each when bus-powered mode hub.

2)To activate the USB hub, your host system should have USB capability.

USB 2 downstream ports

7/20

Image 11

Ergotron A515 manual USB hub

Contents

A515 Back Next Standards and Recommendations A515BACK Introduction A515 Cleaning and Maintenance Following items should be found in the packaging Packing List Selecting a suitable location Connecting the monitor A515 USB hub Setting the refresh rate Recommended primary mode User’s Environment 11/20 Adjusting the picture Using the On Screen Display Direct access buttons Color Control OSD Adjustments 15/20 Mode Reducing power consumptionPower consumption Display does Problem Possible solution Blank screenError message Not enter power Shape or quality Problem Possible solution Color defectsPower LED is a orange color Size, position Orange color Contacting serviceProblemPossible solution Safety and EMC Input signalsMaximum resolution Power management