Separate Type5
Input Versatility
Multi-format Signal Support
The MEU-WX2 Multiformat Engine Unit of the separate type
LUMA monitors can accept almost any SD or HD video format,
both analog and digital. These include composite NTSC and PAL,
component 480/60i and 575/50i, progressive 480/60P and
576/50P, and high-definition 1080/60i, 1080/50i, and 720/60P. It
can also accept 1080/24PsF and 1080/25PsF.
Standard interfaces include analog composite (NTSC/PAL),
525i/625i component and RGB, and Y/C*1. Digital interfaces are
offered as optional boards to meet budgetary and user needs.
To keep the unit compact (1RU high), the analog inputs share the
same four BNC connectors, each with loop-through capability.
The MEU-WX2 also accepts various types of analog computer
signals. With its high-performance scan converter, it can display
PC signals from VGA to SXGA*2.
*1 Y/C signals must be input via the BNC connectors of the MEU-WX2 using an
S-Video-to-BNC conversion connector.
*2 SXGA images are down-converted for display.
Input Signals/Input Adaptors
Signal-interface Options
The MEU-WX2 can accept HD-SDI, SD-SDI, or DV signals via
the following optional input adaptors.
BKM-220D, SD-SDI 4:2:2 Input Adaptor*1
• SD-SDI signal input (x2) • SD-SDI monitor output (x1)
• Power consumption: 1.5 W
BKM-243HS, HD-SDI/SD-SDI Input Adaptor*1
• HD-SDI/SD-SDI signal input (x2) • HD-SDI/SD-SDI monitor output (x1)
• Power consumption: 2 W
•HD-SDI and SD-SDI signals are automatically detected.
BKM-255DV*, DV Input Adaptor*1,*2
• DV signal port (x 2) • Power consumption: 4 W
*1 Embedded audio is supported.
*2 The full command set of the AV/C (Audio/Video and Control) protocol is
not supported.
Preset Computer Input Frequencies
The MEU-WX2 is factory preset to accept 19 typical computer
input signal frequencies.
Preset Input Frequencies
575/50i 625 575 16:9/4:3
OOOOO
480/60i*525 483 16:9/4:3
OOOOO
576/50P 625 576 16:9/4:3 —
O
———
480/60P 525 483 16:9/4:3 —
O
———
1080/24PsF 1125 1080 16:9 —
O
—
O
—
1080/50i 1125 1080 16:9 —
O
—
O
—
1035/60i*1125 1035 16:9 —
O
—
O
—
1080/60i*1125 1080 16:9 —
O
—
O
—
720/50P 750 720 16:9 —
O
—
O
—
720/60P 750 720 16:9 —
O
—
O
—
* Also accepts 59.94 Hz field rate.
System Total
Line Active
Line
Aspect
Ratio
Input Signal Interface
Composite/
Y/C RGB/
Component
SD-SDI SD-SDI/
HD-SDI DV
Standard
Optional
BKM-220D Optional
BKM-243HS Optional
BKM-255DV
INPUT MONITOR OUT
BKM-220D
DIGITAL
1 2
INPUT MONITOR OUT
1 2 BKM-243HS
DIGITAL/HD SDI
BKM-255DV
DV IN/OUT
1 2
MEU-WX2
Front Panel
Rear Panel
SD-SDI Input
(BNC x 2) SD-SDI Monitor Output
(BNC x 1) HD-SDI/SD-SDI
Monitor Output (BNC x 1)
DV Input/Output (6-pin IEEE1394 x 2)
HD-SDI/SD-SDI
Input (BNC x 2)
BKM-220D Connector Panel BKM-243HS Connector Panel BKM-255DV Connector Panel
* SXGA and WXGA images are down-converted for display.
P01 VGA mode 3 31.469 59.940 25.175 Negative Negative
P02 640 x 480 VGA VESA 75 Hz 37.500 75.000 31.500 Negative Negative
P03 VGA VESA 85 Hz 43.269 85.008 36.000 Negative Negative
P04 VGA (non-CRT) 29.531 59.780 23.625 Positive Negative
P05 SVGA VESA 60 Hz 37.879 60.317 40.000 Positive Positive
P06 800 x 600 SVGA VESA 75 Hz 46.875 75.000 49.500 Positive Positive
P07 SVGA VESA 85 Hz 53.674 85.061 56.250 Positive Positive
P08 SVGA (non-CRT) 36.979 59.837 35.500 Positive Negative
P09 XGA VESA 60 Hz 48.363 60.004 65.000 Negative Negative
P10 1024 x 768 XGA VESA 75 Hz 60.023 75.029 78.750 Positive Positive
P11 XGA VESA 85 Hz 68.677 84.997 94.500 Positive Positive
P12 1280 x 768 WXGA* (CRT 60 Hz) 47.693 59.992 80.125 Negative Positive
P13 WXGA* (non-CRT) 47.396 59.995 68.250 Positive Negative
P14 1280 x 1024 SXGA* VESA 60 Hz 63.981 60.020 108.000 Positive Positive
P15 SXGA*(non-CRT) 63.194 59.957 91.000 Positive Negative
P16 720 x 400 VGA TEXT 31.469 70.087 28.322 Negative Positive
P17 1024 x 768 VGA (non-CRT) 47.297 59.870 56.000 Positive Negative
P18 1280 x 768 WXGA* (CRT 75 Hz) 60.091 74.926 102.875 Negative Positive
P19 1280 x 800 WXGA 48.935 59.969 68.900 Negative Negative
VerticalHorizontal
No. Preset Signal fH [kHz] fV [Hz] Dot Clock
[MHz]
Sync.polarity