OPERATING TIPS

The following conditions tend to reduce the effective range of two-way radios and should be avoided whenever possible.

∙Operating the radio in low terrain areas or while under power lines or bridges.

∙Operating the radio inside of a vehicle or inside metal or steel framed building unless using an outside antenna.

∙Obstructions such as mountains or buildings between the person sending and the person receiving the message.

In areas where transmission or reception is poor, some improvements may be obtained by insuring that the antenna is vertical. Moving a few yards in another direction or moving to a higher elevation may also improve communication.

OPERATING PROCEDURES

Two-way FM radio systems must be operated in accordance with the rules and regulations of the Federal Communications Commission (FCC). As an operator of two-way radio equipment, you must be thoroughly familiar with the rules that apply to your particular type of radio operation. Following these rules will help eliminate confusion and will assure the most efficient use of existing radio channels. This will provide a smooth operating radio network.

When using two-way radios, remember the following rules:

1.It is a violation of FCC rules to interrupt any distress or emergency messages. As the radio operates in much the same way as a tele- phone "party line", always listen and/or observe the absence of the "BSY" flag to make sure that the line is clear. If someone is sending an emergency message, such as reporting a fire or asking for help in an accident; KEEP OFF THE AIR! Emergency calls have priority over all other messages.

2.Use of profane or obscene language is prohibited by federal law.

24

Page 23 Page 25
Page 24
Image 24
Ericsson LBI-38823D manual Operating Tips, Operating Procedures, When using two-way radios, remember the following rules
Page 23 Page 25

LBI-38823D specifications

The Ericsson LBI-38823D is a significant component in the realm of telecommunications technology, reflecting the advancement in infrastructure aimed at enhancing mobile network performance. As part of Ericsson's extensive portfolio, this product is designed to support various network requirements and enable operators to optimize their services effectively.

One of the primary features of the LBI-38823D is its compatibility with LTE networks, providing seamless integration for operators looking to enhance their existing infrastructures. The unit is engineered to facilitate high-speed data transmission while ensuring low latency, which is crucial for applications requiring real-time performance such as video streaming and online gaming.

In terms of technology, the LBI-38823D supports advanced functionalities like MIMO (Multiple Input Multiple Output), which significantly boosts data throughput and signal quality. MIMO technology utilizes multiple antennas at the transmitter and receiver ends, enabling the simultaneous transmission of multiple data streams. This results in an increase in capacity and reliability, which are essential for meeting the demands of a growing user base and the rising expectations for mobile services.

Another noteworthy characteristic is its support for Carrier Aggregation, a technique that combines different frequency bands to enhance network efficiency and user experience. By aggregating carriers, the Ericsson LBI-38823D enables operators to maximize their spectrum usage, leading to improved peak data rates and overall network performance.

Moreover, the LBI-38823D is built with robust security features, ensuring that data transmission remains secure against potential breaches. As cybersecurity becomes increasingly critical in telecommunications, this product has been designed to protect both operator networks and end-user information.

Designed for scalability, the LBI-38823D allows operators to expand their networks easily as demand grows. This flexibility makes it an ideal choice for service providers looking to future-proof their investments and ensure long-term viability.

Overall, the Ericsson LBI-38823D is a state-of-the-art solution that embodies the convergence of innovation and reliability in telecommunications. With its advanced features, support for cutting-edge technologies, and emphasis on security and scalability, it is well-positioned to meet the evolving needs of the telecommunications industry while enhancing user experience.
Top Page Image Contents