Precision Weighing Solutions
EscaliTM
User Manual
Keso
25 Lb / 12 Kg
Digital Scale
www.Escali.com
Selecting the default weight
Before the scale is turned ON, you may select the default weighing units by moving the switch (located on the right side of the scale) to g or oz. Once the scale is activated, the display will show the default- weighing units. You may switch to the other weighing units during use by moving the switch.
How to reset the scale:
If a series of dotted lines appears on the display and/or the scale fails to weigh items placed on the platform:
1)Remove the item from the platform and press the “OFF” button
3)Press the “ON” button again; your scale is now reset to “0”
How to use the special built-in holder:
1)Before activating the scale, lift the
2)On the left side, press the “ON” button
3)Place and secure item slowly into the special holder
*Please note - If the scale is activated before lifting the
Battery Replacement/Installation
Replace the battery when the LCD display reads “LO”.
1)Remove the battery door
2)Install the
3)Replace the battery door
Power Source:
Dimensions: 8" x 8" x 3" (20.3cm x 20.3cm x 7.6cm)
Resolution: 0.1 oz / 2 gr up to 2 Lb / 1 Kg,
0.5oz / 5 gr over 2 Lb / 1 Kg
Capacity: 25 Lb / 12 Kg
Weight Modes: Kg/gm and lb/oz
Auto Shut Off: Turns off after
Warranty: Manufacturer’s five (5) year warranty, see www.escali.com for full details.
Thank you for purchasing an Escali Digital Scale.
Please read the following operation information to ensure the proper function of your new scale.
How to weigh*
1)On the right side, move the switch to select the units (g/oz)
2)On the left side, press the “ON”
3)Place item slowly on the platform
*Please Note: If the scale does not return to “0” g/oz after removing the item from the platform, simply press the “ON” button again. This will reset the scale to “0” g/oz.
How to use the “Tare” feature:
This feature allows you to obtain the exact weight of an item in a container, by subtracting the weight of the container.
1)On the right side, select measuring units (g/oz)
2)On the left side, press the “ON” button
3)Place the container, without the item, slowly on the platform
4)Press the “ON” button again. The weight of the container will be removed and the display will reset to “0”
5)Slowly add the item to the container. The display will show the weight of the item only
How to clear “Tare” feature:
1)Remove all items from the platform.
2)Press the “OFF” button
3)Press the “ON” button
Now the scale is reset to “0” and the weight of all items on the platform will be displayed.
Reading the unit of measurement for ounces
This unit does not display decimal points, instead it uses oz. Example: The display will read 1LB 12oz1, which is 1lb 12.1oz
Additional Information
1)Make sure your scale is at room temperature and on a stable horizontal surface free of vibration.
2)This scale is not waterproof. Do not expose to moisture.
3)As this scale is a precision instrument, it must be handled with extreme care. Avoid rough treatment, shaking and vibration.
4)Do not disassemble this scale or the warranty will be void.
5)The display value may be affected by electromagnetic disturbances such as operating near a radio. If this occurs, move the device that is causing the disturbance and turn the scale off and restart.
Do not place overweight items on scale
Weighing items over the maximum weight capacity will cause an “EE” error to display. Immediately remove overweight items to avoid causing damage to your scale.
Connecting the 110V AC adapter
Insert the adapter’s plug into the matching outlet holes. Firmly push and adjust the plug until it is fully inserted into the scale.
Warning – To prevent damage to your scale, use only an Escali adapter or your warranty will be void
Escali’s liability is limited to two (2) times the cost of the product
© Copyright Escali LLC, 2003
