Escali M-Series OPERATION, LEVEL THE SCALE, ACTIVATING THE SCALE, EL BACK LIGHT, WEIGHING AN ITEM, SELECTING WEIGHT UNIT, USING THE HOLD FUNCTION, USING THE TARE MODE:

OPERATION

LEVEL THE SCALE

When the scale is put to use at a new place, adjust the level of the scale by turning the 4 level adjusting feet until the bubble is located in the middle position of the bubble leveler.

ACTIVATING THE SCALE

1.Turn on the “power on/off switch”

2.Turn the scale on by pressing “ON/OFF” key

2.The LCD screen will show all characters for a few seconds and then “0.000►” will be shown on the display.

3.The scale turns off automatically after being idle for two minutes.

EL BACK LIGHT

Your can turn On or Off the Back light of the scale by pressing the “Back Light” key

WEIGHING AN ITEM

1.Turn on the scale.

2.Place an item on the platform and the exact weight of item will be displayed.

SELECTING WEIGHT UNIT

When the scale is power on, press the “MODE” key repeatedly to change weight unit according to following sequence:

kg --- lb --- oz --- lb/oz

Displays 4 modes, e.g.	“kg” mode	1.500kg
	“lb” mode	3.32lb
	“oz” mode	52.9oz
	”lb/oz mode	3lb 4.9oz

USING THE HOLD FUNCTION

When the object is on the scale platform, press the “HOLD” key once and then take off the object from the scale platform. the weight of the object will be hold for 1 minute with a HOLD icon displays on the left side of the LCD.

USING THE TARE MODE:

1.Turn the scale on.

2.“0.000►” will be shown on the display after a few seconds.

3.Place an item on the weighing platform and read the value accordingly.

4.Press the “TARE” key, the weight of this item will be eliminated and the reading will change to “0.000►”.

5.Place next item on the weighing platform and get the reading.

6.Press “TARE” key again will show the total weight

7.Repeat step (4) to (6) for further objects.

Note: The scale will display a negative reading when you remove all items. Press the “Tare” key once and the negative reading will disappear.