Front panel features
A B
ENGLISH
ED C
When the LINE IN/DIRECT IN switch on the rear panel is set to “DIRECT IN”, the front panel buttons will not work except for the POWER switch. This is normal for DIRECT mode operation.
Note: The following 3 controls will only work in the “LINE IN” (Integrated amplifier) mode.
AINPUT
Select the terminal to which the equipment to play is connected.
BMUTING
Use this button to mute the sound.
CVOLUME
Turn this knob to adjust the volume.
DPOWER
Use this switch to turn the unit on and off.
The indicator lights in red once when you turn on the unit. Then the indicator lights in blue after 1 minute and audio is output. The indicator lights in red also when the protection circuit is operating (page 14).
<Once the unit is turned off, wait for at least 5 minutes to turn it on again in order to protect the tubes.
ERemote control sensor
Receives signals from the remote control unit. Point the remote control unit at this sensor when operating the remote control unit (This works in the rear panel “LINE IN” setting only).
11
