®
Automatic Washer
PRODUCT MODEL NUMBERS
ETW4100S ETW4300T
ETW4300S ETW4400T ETW4400S
RECESSED AREA AND CLOSET INSTALLATION
For closet installation, with a door, the minimum ventilation openings in the top and bottom of the door are required (view 2). Louvered doors with equivalent air ventilation openings in the top and bottom are acceptable.
Electrical:
15 or 20 amp electrical supply. A
"
" 
"
1
|
|
| " |
|
|
| " |
|
|
| " |
" | " | " | " |
2
"
"
3
Front view
Side view | Closet door with vents |
DRAIN SYSTEM OPTIONS
Standpipe drain system - wall or floor (view 1 & 2)
The standpipe drain requires a minimum diameter standpipe of 2" (5 cm). The minimum
The top of the standpipe must be at least 39" (99 cm) high and no higher than 96" (244 cm) from the bottom of the washer.
39"
(99 cm)
Laundry tub drain system (view 1) | Floor drain system (view 2) |
The laundry tub needs a minimum | The floor drain system requires a siphon |
20 gal. (76 L) capacity. The top of the | break that may be purchased separately. |
laundry tub must be at least 39" (99 cm) | The siphon break must be a minimum of |
above the floor and no higher than | 28" (71 cm) from the bottom of the |
96" (244 cm) from the bottom of the | washer. Additional hoses might be |
washer. | needed. |
| 28" |
39" | (71 cm) |
(99 cm)
1 | 2 | 1 | 2 |
Because Whirlpool Corporation policy includes a continuous commitment to improve our products, we reserve the right to change materials and specifications without notice.
Dimensions are for planning purposes only. For complete details, see Installation | Ref. W10044800 |
Instructions packed with product. Specifications subject to change without notice. | |
|
