Freestanding Gas Range
PRODUCT MODEL NUMBERS
TGP305T
Gas supply: Use 3/4" (1.9 cm) rigid pipe gas supply line to the range location. A smaller size pipe on longer runs may result in insufficient gas supply. With L.P. gas, piping or tubing size can be 1/2" (1.3 cm) minimum. If local codes permit, it is recommended that new flexible metal tubing,
Electrical:
OVERALL DIMENSIONS
36" | |
(67.9 cm) | (91.4 cm) |
depth with | cooktop |
handle | height |
42" (106.7 cm) overall height
(61.6 cm) | width |
CABINET OPENING DIMENSIONS
Cabinet opening dimensions shown are for 25"
(64 cm) countertop depth, 24" (61 cm) base cabinet depth and 36" (91.4 cm) countertop height.
13" (33.0 cm) max. upper cabinet depth
NOTE: 24" (61 cm) minimum when bottom of
18" (45.7 cm) min. clearance upper side cabinet to
30" (76.2 cm) min. cabinet opening width
2" (5.1 cm) min. countertop space to side wall or other combustible material
For minimum clearance to top of cooktop, see NOTE.
wood or metal cabinet is protected by not less than 1/4" (0.64 cm) flame retardant millboard covered with not less than No. 28 MSG sheet steel, 0.015" (0.4 mm) stainless steel, 0.024" (0.6 mm) aluminum or 0.020" (0.5 mm) copper.
30" (76.2 cm) minimum clearance between the top of the cooking platform and the bottom of an unprotected wood or metal cabinet.
If installing a range hood or microwave hood combination above the range, follow the range hood or microwave hood combination installation instructions for dimensional clearances above the cooktop surface.
countertop
This shaded area recommended for electrical outlet.
3"
(7.6 cm)
This shaded area recommended for installation
of gas pipe.
10" (25.4 cm)
24"
(61.0 cm)
8"
5" (20.3 cm)
(12.7 cm)
5"
(12.7 cm) 2"
(5.1 cm)
Because Whirlpool Corporation policy includes a continuous commitment to improve our products, we reserve the right to change materials and specifications without notice.
Dimensions are for planning purposes only. For complete details, see Installation | Ref. W10130752 |
Instructions packed with product. Specifications subject to change without notice. |