ETA Systems ETA-20SH instruction

ETA-20SH

AC Power Conditioning & Suppression Module

ETA-20SH

AC Power Conditioning & Suppression Module

1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.

Telephone: 800-321-6699 • Fax: 800-996-3821

– 1 –

ETAsys.com

Specifications are subject to change without notice.

Image 1

ETA Systems ETA-20SH specifications

Contents

ETA-20SH Table of Contents AC Power Conditioning & Suppression Module Introduction KEY FeaturesApplications ETA-20SH Safety Instructions AC Spike Protection EMI/RFI FiltersAC Surge Protection EVS Protection AC Mains Power Cord 9 3m, 12-gauge Panel Features Using the ETA-20SH AS a Standalone Unit ECM Data Wire and DistanceRemote Activation VIA Switch or DCV Trigger Wiring with AN ETA-ECS6RM Sequencer Controller Single ETA-ECM20 Control Port ETA-ECS6RM Sequencer Controller Interface with ETA-20SHRelay Contacts Wiring With an ETA-ECS3 Sequencer Controller Troubleshooting the ECM Module AS a Standalone Unit Troubleshooting the ECM Module with AN ETA-ECS3 Issue 1 Incoming AC LED on the ECM is not illuminated Troubleshooting the ECM Module with AN ETA-ECS6RM Issue 6 No Voltage Reading at the ETA-ECS6RM ETA-20SH Specifications Service Limited Warranty