| |
| 30A AC Power Module Spike Suppressor |
| |
Type | AC Power Module Spike Suppressor |
RoHS Compliant | Yes |
Safety Listings | ETL (UL 60065 Standard) |
Front Panel |
|
Outlet | Single 30A, |
Indicators | Active (Green), Fault (Red), Incoming AC (Red) |
External Trigger/Manual On | Slide Switch |
Connectors | 5 Position Phoenix Euro Block Style |
Hard Switch Remote Trigger | SPST Contact |
Status Signals | Output for Voltage (When used with |
AC Mains Interconnect | Screw Terminal Block |
Technical Data |
|
Current Rating | 30A |
Operating Voltage | 102VAC - 132VAC |
Power Consumption | 500 milliwatts |
Power Requirements | 120V 60Hz |
Extreme Voltage Shutdown | (EVS) Below 102V or above 132V AC Line (When used with |
DCV Remote Trigger | |
High Voltage Surge Protection | Trigger at 133VAC, 1ms typically (When used with |
Low Voltage Surge Protection | Trigger at 101VAC, 1ms typically (When used with |
Spike and Surge Suppression | Hot to Neutral, Hot to Ground, Neutral to Ground |
Spike Protection Modes | Circuitry on Incoming AC Mains |
Min. Spike Clamping Voltage | 460 VRMS @ 3,000 amps |
Max. Spike Clamping Voltage | 6kV |
Max. Spike Clamping Resp. Time | <1 nanosecond |
Spike Clamping Voltage @ 100A | 1,250Vp for 20µs |
Maximum Surge Current | 6,500A |
Energy Rating | 600 Joules |
Temperature Range | 5° – 35°C |
Humidity Range | 5% to 95% R.H. |
Mechanical |
|
Chassis Finish | Black |
Mounting | #8 5⁄16" Self Tapping Screws |
Height | 3" (76.2mm) |
Width | 3.5" (88.9mm) |
Length | 8.5" (215.9mm) |
Weight | 1.25 lbs (0.68kg) |
1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.
Telephone:
– 10 – | ETAsys.com |
Specifications are subject to change without notice.
