ETA-S15L
Power Conditioner & Distribution Unit
INTRODUCTION
Thank you for purchasing the ETA Systems ETA-S15L AC Power Conditioner & Distribution Unit. The ETA-S15L has been designed to meet most installation requirements for AC power distribution and equipment power protection. To light your rack, the ETA-S15L has incorporated a front panel pull-out dimmable LED tube light. The rear of the rack can be illuminated by the optional Atlas Power 16” gooseneck LED lamp (AP-GNL18) connected via an XLR style socket. LED lamps are far superior in longevity along with heat reduction when compared to traditional incandescent lamps and the XLR base mounts offer a better connection point over commonly used BNC type bases.
The ETA-S15L features noise filtering for unwanted Radio Frequency Interference (RFI) that is commonly introduced into AC lines by nearby radio transmitters or wireless products. EMI filters are incorporated to reduce noise from Electromagnetic Interference (EMI) from such items as electric motors and switching power supplies. The benefit of these filters can be seen on video products or audibly by reducing static pops and external signal interference.
Unstable AC Mains voltage is one of the main reasons for equipment failure. The amount of energy that can be injected into the power system can be immense with voltages reaching 6kV or amperage peaks of 3000A. These spikes are very fast and usually only last for a very short period of time. The ETA-S15L’s circuitry is very fast and can suppress unwanted energy within a nanosecond response and sustain the suppression up to 2 milliseconds, thus ensuring virtually trouble-free protection. If damage to the suppression circuitry occurs the AC fault LED will illuminate.
The ETA-S15L offers power management control, noise filtering, and spike/surge protection, making it the most compact, effective power
management protection system on the market today.
KEY FEATURES
•9 Total Outlets
•8 Rear Panel Switched Outlets
•1 Front Panel Unswitched Convenience Outlet
•RFI Noise Filtering to Reduce Radio Frequency Interference
•EMI to Reduce Electromagnetic Interference
•Circuit Breaker Protection @ 15A
•Front Mounted Pull-out LED Light With 2-Position Dimmer
•Rear Mounted XLR Connector for 12VDC LED Lamp (AP-GNL18) (Lamp Sold Separately)
•Spike Suppression up to 6000V
•AC Fault Indicator
APPLICATIONS
The ETA-S15L was designed to be flexible with features that allow it to be used in a variety of applications. The ETA-S15L can be used solely for protection against voltage surges or for AC distribution. If fuzzy video or frequent static pops occur, the AC power conditioning may eliminate or reduce those inconveniences. The following are just a few examples of applications where the ETA-S15L can be used:
•Restaurants
•Houses of Worship
•Schools
•Home Theaters
•Office Buildings
•Sports Bars
1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.
Telephone: 800-321-6699 • Fax: 800-996-3821
Specifications are subject to change without notice.
