PD11P, PD11VP, PD11LP, PD11LVP Features

PD11P, PD11VP, PD11LP, PD11LVP Features:

•Light Switch (PD11LP/LVP/LVSP) activates rack illumination; choice of HI or LOW intensity

•Light Tubes (PD11LP/LVP/LVSP) illuminates up to 25 rack spaces

•4 dual 20 amp U-grounded switched outlets per unit

•1 dual 15 amp U-grounded "always on" and protected outlet

•Digital Voltmeter Readout (PD11VP/LVP/LVSP) displays incoming line voltage

•Resettable 20 amp thermal circuit breaker; 15 amp for front panel outlet

•Lighted Outlet Power Switch activates protection and filtration to all switch outlets and front panel outlet

•12-gauge, 3-prong, 10-foot, 20-amp power cord. Requires 20 amp circuit and receptacle outlet

•Protected "always on" 15 amp AC power outlet on the front panel

•Total unit 20 amp and 15 amp outlet circuit breakers located on front panel

•Three-stage spike and surge protection

•Two-stage EMI/RFI filtration

•Ground and AC line fault check

•One rack space high

•One year limited warranty

•Microprocessor monitored sequential power distribution system

•Four power up/down steps or stages of distributed and conditioned power

•Four pre-set power up/down intervals of 1, 5, 10 or 30 seconds

•Optional manual settings for up to 240 seconds between intervals

•One dual 120 amp U-grounded outlet per stage

•One dual 20 amp "always on" U-grounded outlet

•Full 20 amps, 2400 watts capacity per unit