ETI Sound Systems, INC LX18A V2 Important Safety Information, Heed All Warnings, Cabinet Features

INSIDE THIS INSTRUCTION MANUAL
Important Safety Instructions / Specifications	2
Set-up Information	3
Panel Specifications	4
Controls and Connections	5-7
Contact Information	8

IMPORTANT SAFETY

INFORMATION

11. Read these instructions.

12. Follow all instructions.

13. Keep these instructions.

14. Heed all warnings.

15. Do not use the LX-18A V2 near water.

16. Clean only with a dry cloth.

17. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.

18. Do not install near any heat sources such as radiators, stoves, or other devices that may produce heat.

19. Do not defeat the safety purpose of the polarization or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong is provided for your safety. If the provided plug does not fit your outlet, consult an electrician for replacement of the obsolete outlet.

10.Protect the power cord from being walked on or pinched, particularly at the plug and the point where it exits the LX-18A V2 amplifier.

11.Only use attachments / accessories that are recommended by B-52 Pro-Audio.

12.Use only with a cart, stand, bracket or table specified by B-52 Pro-Audio or sold with

the LX-18A V2. When a cart is used, use caution when moving the cart / LX-18A V2 combination to avoid injury from-tip over.

13.Unplug the LX-18A V2 during lightning storms or when un-used for long periods of time.

14.Refer all servicing to qualified personnel. Servicing is required when the LX-18A V2 has been damaged in any way such as when power-cord or plug is damaged, liquid has been spilled, or objects have fallen into the LX-18A V2 cabinet, the LX-18A V2 has been exposed to moisture or rain, does not operate normally, or has been dropped.

15.To reduce the risk of fire or electric shock, do not expose the LX-18A V2 to rain or moisture.

	HEED ALL WARNINGS
CAUTION	WARNING: To reduce the risk or fire or
	electrical shock do not expose this equipment
RISK OF ELECTRIC SHOCK
DO NOT OPEN	to rain or moisture.

AMPLIFIER SPECIFICATIONS:

υMade In The U.S.A.

υ1200 watt RMS Digital Amplification.

υ800 watts RMS @ 8 Ohms.

υ1200 watts RMS @ 4 Ohms.

υFrequency Range: 30-120Hz (+/- 3db).

υCrossover Frequency: 120 Hz.

υCrossover Slope: 4th Order (24db/octave) - LP & HP

υSubsonic Filter: 6th Order (36 db/octave).

υTHD: 0.075% @ Rated Power Over Full Bandwidth.

υNominal Impedance: 8 Ohms

υSensitivity: 102 dB

υPeak SPL: 132 dB

υPower Consumption @ Idle: Less than 20 watts.

υPower Requirements: 120v<>60Hz<>12a.

AMPLIFIER FEATURES:

υXLR Balanced Inputs.

υXLR Balanced Full-Range Outputs

υXLR Balanced (120 Hz) High-Pass Outputs.

υ0–180 Degree Phase Switch.

υNeutriktm Speaker Output.

υFull Thermal & Short Circuit Protection.

υSignal Sensing On/Off Circuitry.

CABINET FEATURES:

υVoid-free 7-layered plywood Construction.

υRugged black carpet finish

υ4” Heavy-Duty Casters.

υAluminum front panel heat sink.

υReinforced internal bracings

υDimensions (W) x (H) x (D): 24” x 36” x 36”

υWeight: 167 lbs

2