ETON SOUND 100 OPERATION MANUAL
ACTIVATING THE ALARM
For the alarm to function it must be activated. To do this, use quick, short presses of the radio’s or the remote’s ALARM button, causing the following to appear in the display:
•ALARM with speaker symbol – wakes you up to a beeper sound.
•ALARM with musical note symbol – wakes you up to the last radio station selected by either tuning or by selecting a memory.
•ALARM, speaker symbol and musical note symbol all disappear from the display, thus deactivating the alarm completely.
WAKING TO A MEMORY PRESET
Tune to the memory preset of your choice, set the alarm time, activate the alarm and place the Eton Sound Radio in standby mode.
USING THE SNOOZE FEATURE
Once the alarm activates, pressing the radio’s or the remote’s SNOOZE allows cancellation of the alarm for 5 minutes; then the alarm resumes. To completely cancel the snooze setting, press the radio’s or the remote’s ALARM button.
SETTING THE SLEEP TIMER
The sleep timer enables play for a specified amount of time
•To activate the sleep timer, turn on the radio and press the radio’s or the remote’s SLEEP button with successive, quick, short presses to select a sleep time of
•To deactivate the sleep timer, press the radio’s or the remote’s SLEEP button with successive, quick, short presses to select OFF.This setup mode is automatically exited after about 4 seconds.
WARRANTY REGISTRATION
To ensure full warranty coverage or product updates, registration of your product should be completed as soon as possible after purchase or receipt. You may use one of the following options to register your product:
1.By visiting our website at http://www.etoncorp.com.
2.Mail in enclosed warranty card.
3.Mail your registration card or information to the following address; Include your name, full mailing address, phone number, model pur- chased, date purchased, retail vendor name and product serial num- ber (typically located in or near the battery compartment):
Etón Corporation
1015 Corporation Way
Palo Alto, CA 94303 USA
6 | 7 |
