10
ENGLISH
HOW TO MAINTAIN
The instructions given in this booklet serve as a guide to routine
maintenance. Keep the cleaner operating at top efficiency. Empty
the dust cup after each use.
Note: Turn off the power switch E and unplug the electrical
cord K to service.
Empty Dust Cup
Step 1: Push dust cup latch F to release dust cup.
Step 2: Rotate dust cup G out from body A (Fig. 4).
Step 3: Remove dust cup filter H from the dust cup G , shake
contents of dust cup into a waste container (Fig. 5).
Step 4: To replace dust cup G , install bottom of cup into unit A
(Fig. 6).
Step 5: Rotate dust cup into position and push gently into body
until the latch catches.
Clean Dust Cup Filter
Clean the dust cup filter H as necessary.
Step 1: Remove dust cup G .
Step 2: Grasp handle inside filter and pull filter out of dust cup G
(Fig. 7).
Step 3: Shake and brush the dust and dirt from filter H .
Step 4: To replace filter H , push filter into dust cup G so that
flexible rim of filter fits securely into dust cup.
Step 5: If desired, launder the filter by hand in warm water using
a mild detergent.
Step 6: Air dry thoroughly.
Step 7: Reinstall filter H in dust cup G .
Replace a dirty or torn filter. Order additional dust cup filter, part
number 63170.
Note: The dust cup filter is not dishwasher safe. Do not put
in dishwasher.
G
F
A
FIG. 5
H
G
FIG.GA
F
H
G
FIG. 4
FIG. 5
FIG. 6
FIG. 7