How to Use (continued)
Adjust telescoping handle by grasping vacuum firmly in one hand while pushing button on handle forward and sliding handle to desired length.
Changing And Cleaning Dust Cup Filters
CAUTION: Always unplug from electrical outlet before opening the dust cup.
1.To open the dust cup, push release button and pull dust cup away from vacuum.
2.Pull filter cover and filter away from vacuum.
3.Empty debris from the dust cup and brush debris from filter cover and filter.
4.Occasionally rinse the filter cover and filter in cold water. Then wait until they dry completely before placing them back on vacuum.
5.Place the dust cup filter into filter cover and place filter cover back on vacuum.
6.Reattach the dust cup to the vacuum.
Release
Button
Stick vac can be used for above the floor cleaning.
Release handle from vacuum by pressing the black button release and pulling up on handle.
Dust Cup
Filters
Hand Vac
CAUTION: The hand vac is a very powerful unit. Make sure that you hold it firmly, otherwise it can slip out of your hand and cause injury.
1.Hold the hand vac firmly with your hand on handle.
2.Push the On
3.Start vacuuming.
Dust Cup
CAUTION: Adequate airflow must be maintained at all times through the cleaner. Any obstructions will cause the motor to overheat resulting in permanent damage.
4
