HOW TO MAINTAIN

The instructions given in this booklet serve as a guide to routine maintenance. Keep the cleaner operating at top efficiency. Empty the dust cup and clean the filter after each use.

Storing and Charging the Vacuum Cleaner

Return your vacuum cleaner to the wall holder (as shown) after every use. Firmly position into the mounting bracket ensuring that the vacuum cleaner fits correctly into the charging socket. It will then be recharged and ready for operation at all times.

The plug charger can be left in the electrical outlet at all times, even when the unit is in use. It is impossible to overcharge the batteries. The plug charger will become warm, however, this is not a cause for concern. The unit is charging when the red light on the top of the vacuum cleaner is illuminated.

Vacuum stored in wall holder.

Empty Dust Cup

1.Push down on dust cup latch.

2.Pull dust cup from motor unit.

3.Remove motor filter from dust cup.

4.Shake contents into a waste container.

5.Clean motor filter (refer to motor filter section, page 9).

6.Replace motor filter in the dust cup.

7.Press dust cup onto handle section until they snap together.

Clean Motor Filter

Clean the motor filter after each cleaner use.

1.Remove the filter frame from the dust cup.

2.Shake and brush the dust and dirt from filter.

3.If desired, launder the filter by hand in warm water (150°F, 65°C) using a mild detergent.

4.Air dry thoroughly.

Replace a dirty or torn filter. Order additional motor filters from The Eureka Company, Bloomington, IL 61701.

Order motor filter, part number 60694.

Remove Ni-MH Battery Pack for Disposal

NOTE: Remove the battery pack only when the batteries no longer hold a charge and you plan to dispose of them.

CAUTION: Do not short circuit or dispose of in fire. Dispose of properly.

1.Lay cleaner down on its top.

2.Grasp handle with thumb on battery cover. Using thumb push down and slide battery cover toward wrist. This will loosen the battery cover so it can be freed from the cleaner.

3.Remove battery pack and throw away.

8

9

Page 7 Page 8
Page 8
Image 8
Eureka 178A warranty HOW to Maintain, Storing and Charging the Vacuum Cleaner, Empty Dust Cup, Clean Motor Filter
Page 7 Page 8

178A specifications

The Eureka 178A is an innovative and versatile piece of technology designed to enhance various applications, particularly in industrial and commercial settings. This advanced machine is renowned for its robust build quality, reliability, and the integration of cutting-edge features that cater to a wide range of operational needs.

One of the standout features of the Eureka 178A is its powerful and efficient motor. This motor is designed to provide superior performance while consuming minimal energy, making it an environmentally friendly option. The motor is equipped with advanced thermal management systems that prevent overheating, ensuring longevity and consistent performance under demanding conditions.

Another key characteristic of the Eureka 178A is its user-friendly interface. The machine includes an intuitive control panel that allows operators to adjust settings with ease, monitor performance metrics, and make real-time modifications during operations. This design consideration enhances productivity as it minimizes the learning curve required for effective operation.

In terms of technology, the Eureka 178A is equipped with state-of-the-art sensors that enable it to collect and analyze data in real time. These sensors allow for predictive maintenance, alerting users to potential issues before they escalate, thus reducing downtime and repair costs. Additionally, the machine can often be integrated with IoT solutions, enabling remote monitoring and management, which is invaluable in today’s connected world.

Durability is another hallmark of the Eureka 178A. Constructed from high-grade materials, this machine is designed to withstand the rigors of daily use in demanding environments. Its weather-resistant components make it suitable for both indoor and outdoor applications, ensuring it can perform reliably in various conditions.

The Eureka 178A also offers customizable options to cater to specific user requirements. Modular components and attachments can be added or removed based on the task at hand, allowing for a high degree of flexibility and adaptability. This modularity makes it a preferred choice for businesses that require a machine capable of evolving with their operational needs.

In summary, the Eureka 178A stands out for its powerful performance, user-friendly design, advanced sensor technology, durability, and adaptability. These features make it a valuable asset for any organization looking to improve efficiency and operational capability in a range of applications.
Top Page Image Contents