How to Check and Clear Hose Blockages
Low suction or poor pickup may be due to a blockage in the vacuum cleaner.
1.Remove attachment hose and check suction at end of hose
– if little or no suction, check disposable dust bag. Change if needed. If no improvement proceed to step 2.
NOTE: Turn off the switch and unplug the electrical cord before clearing hose.
2.Remove bag cover and disposable dust bag.
3.Remove tube inside dust bag compartment by removing 3 screws.
Check for any obstructions that may be in the hose. Any obstructions can be removed by using a blunt instrument to clear the hose. Flexing the hose may help loosen the clog.
4.Reinstall the tube after clearing any clog. Reinstall the disposable dust bag and bag cover.
NOTE: If no improvement in performance on carpet, proceed to following page.
Handle
Latch
2
1
1.Remove attachment hose and check suction at end of hose.
3
2.Remove bag cover. Press down on handle latch and lift cover away from cleaner.
3.Remove tube inside dust bag compartment by removing 3 screws.
12
