Eureka 3270 Series How to Identify Parts of Vacuum Cleaner, Maintenance Schedule, Brush Roll

How to Identify Parts of Vacuum Cleaner

	Handle
	Hose	Cord Retainer
Self-Cleaning Duster	Power Paw®		Hose Hook
	Power Switch		Dusting Brush
(some models)
	Filter and Screen		Quick Release Cord Wrap
	(located inside dust cup)		Carrying Handle
	Dust Cup		Power Cord
Duster Activation Lever	Nested Crevice Tool
	& Extension Wand		Lower Cord Wrap
Headlight	HEPA Filter Compartment
			Hose Retainer
	Height Adjustment Knob		Handle Release
	Brush Roll Cover

Maintenance Schedule

Maintenance Schedule is also located on back side of dust cup.

!READ ALL INSTRUCTIONS BEFORE USING THIS VACUUM CLEANER. Moving parts! Make sure power switch is in OFF (O) position before plugging in power cord.

DUST CUP – Empty after each use

Press lever to release bottom lid.	Close bottom lid
Debris will empty.	until it clicks.

FILTER DCF21 – Check regularly, clean as needed

Filter

DCF21

Empty debris. Pull back		Pull out filter.	Rinse filter and dust cup;
latch to lift off lid.			dry thoroughly.
Screen
Rinse dust cup;	Reinstall filter and		Align lid at front; press down
dry thoroughly.	screen inside dust cup.		until lid snaps into place.
HEPA FILTER HF7 – Replace 6 months
HEPA Filter
HF7
Lay flat, grasp cover and pull off.			Lift out filter and replace.

		BRUSH ROLL – Clean monthly
Brush Roll	EXT-U Belt	EXT-U BELT – Replace worn, cut or out of shape belt

2 Eureka Customer Service HELPLINE 1-800-282-2886 www.eureka.com