HOW TO MAINTAIN (continued)
Brush Roll
NOTE: Turn off switch and unplug the electrical cord before inspecting brush roll.
Long hair, thread, string, etc. can wrap around the revolving brush roll and result in reduced performance.
To check brush roll for debris turn cleaner nozzle over and inspect for wrapped matter. Use scissors to cut debris from brush roll.
Brush Roll
How to Check for Blockages
NOTE:Turn off switch and unplug the electrical cord before checking for blockages.
If suction performance diminishes, check for blockages in suction path.
Hole
1. Remove dust cup and set aside.
2.Inspect for blockages inside hole area at base of body opening. Use tool or coat hanger to remove blockage.
3.Reinstall dust cup.
Access
Door Latch
Brush |
Roll Area |
4.Flip vacuum over and inspect dirt channel in brush roll area. Open access door by pulling back on access door latch and lifting up, check for blockage. Remove any blockages with tool or coat hanger.