Eureka 4242A manual How to Identify Parts of Vacuum Cleaner, Maintenance Schedule, Brush Roll

How to Identify Parts of Vacuum Cleaner

	Telescoping Handle
	(on some models)
		Cord Retainer
	Hose		Hose Hook
	Turbo nozzle
		Dusting Brush	Crevice Tool
Telescoping Wand	Filter and Screen	Plug Storage	Cord Rewind Button
	(located inside dust cup)
		Carrying Handle	Hose Connector
(on some models)	Dust Cup

Wand Retainer		Cord Reel
Headlight	HEPA Filter Compartment	Power Switch	Hose Retainer
	Height Adjustment Knob	ON (I) / OFF (O)
(on some models)		Handle Release

Brush Roll Cover

Maintenance Schedule

Maintenance Schedule is also located on back side of dust cup.

!READ ALL INSTRUCTIONS BEFORE USING THIS VACUUM CLEANER. Moving parts! Assemble the vacuum cleaner before using.

Filter cover

Filter

DCF21

Screen

HEPA Filter

HF11

Brush Roll EXT-U Belt

DUST CUP – Empty after each use

Push button to release bottom lid.	Close bottom lid
Debris will empty.	until it clicks.

FILTER DCF21 – Clean or replace regularly to maintain suction

Empty dust cup. Pull	Pull out filter cover,	Brush debris from filter,
back latch to lift off lid.	filter and screen	cover and screen. Wash and
		dry thoroughly, as needed.

Rinse dust cup;	Reinstall screen,	Align lid at front; press down
dry thoroughly.	filter and cover.	until lid snaps into place.

HEPA FILTER HF11 – Replace within 6 months

Remove dust cup.	Lift up tab on filter cover	Lift out filter
	and pull off.	and replace.

BRUSH ROLL – Clean monthly EXT-U BELT – Replace worn, cut or out of shape belt

2 Eureka Customer Service HELPLINE 1-800-282-2886 www.eureka.com