Eureka 5190 warranty How to Change Light Bulb only for models with a headlight, Lens Cover

Models: 5190

1 20

Page 15

NOTE: Turn off the power switch and disconnect the electrical cord before changing light bulb.

1.Lower handle to remove two screws from lens cover.

2.Lift lens cover from cleaner.

3.Push light bulb into socket; turn to release.

4.Place new light bulb into socket; turn to secure.

5.Make sure bulb will not touch lens cover.

6.Replace lens cover.

7. Secure with two screws.	3

Use 15 watt replacement light bulb, part number 48815.

Handle

1 Release

Image 15

Contents

Product to the store Do not return thisImportant Safeguards Conseils DE Sécurité Rating Plate Service InformationGeneral Information USA México CanadaPart Bolt Transmission Cable StepUpper Handle Transmission cable between Lower Upper and lower handleSelf-Propelled Selector HOW to USE the SELF-PROPELLED Vacuum CleanerOn/Off 3 I/O HOW to USE the Accessories Extension Wand Nested Extension Wand to add reachHose Strap Upper Retainer Hose Nozzle Lower Hose Strap Hook To check if dirt sensor is working properly Maintenance of Dirt Alert Feature On some modelsBrush Roll Belt HOW to MaintainHow To Replace Brush Roll Belt Brush RollRotate End Cap Left Right Detail Brush RollDetail Hose Assembly Hose Retainer HOW to Clear Hose ClogsTo Change the Cassette Micron Filter To Change Cassette Micron FilterTo remove Hepa Filter How To Replace Filters Motor FilterTo Clean Motor Filter Hepa Filter on selected modelsLens Cover How to Change Light Bulb only for models with a headlightProblem Solving Cause Solution Total Enclosed TotalPage USA Mexico Canada Eureka Limited WarrantyUpholstery nozzle Dusting brush Crevice tool Wands M. to 8 p.m., Central Standard Time, Monday through Saturday