Cleaning and Replacing Filters
HEPA Filter
Inspect the HEPA filter periodically and change as needed. For maximum efficiency, replace the HEPA filter periodically.
To Replace HEPA Filter
1. Push down on latch and pull out on HEPA filter door to remove.
2. Grasp filter and pull out.
3. Place new HEPA filter into cleaner.
4. To close, place HEPA filter door on top of bottom tab, pivot door up and press door against cleaner until it latches.
Use replacement HEPA filter supplied, Style GE1, part number, 62134..
How To Change Light Bulb
CAUTION: Turn off the power switch and unplug the electrical cord before changing light bulb.
1. Lower handle to remove two screws from lens cover.
2. Pull lens cover from cleaner.
3. Support socket with one hand and pull light 
bulb straight out to release.
4. Place new light bulb into socket; push to secure.
5. Push light bulb and socket back so bulb will not touch lens cover.
6. Replace lens cover.
7. Secure with two screws.
Use replacement light bulb,
HEPA
Filter
Latch
HEPA
Filter
Door
Lens
Cover
14
