ROUTINE MAINTENANCE
The instructions in this booklet serve as a guide to routine maintenance. To avoid unnecessary service calls, check the dust cup, filters, belt, and brush roll often. We suggest emptying the dust cup after every use.
NOTE: When vacuuming carpet fresheners or cleaners, powder, plaster dust, or similar fine substances, the dust cup and filters will require more frequent maintenance.
NOTE: Turn off the switch and unplug the electrical cord before changing the filter. Never operate the vacuum cleaner without the dust cup or filter assembly in place.
Removing the Dust Bag (Style LS):
1Remove dust bag cover by lifting up on latch and pivoting dust bag cover out and away from cleaner.
Latch 
2Grasp dust bag flaps and pull out from cleaner.
Flaps |
Installing New Dust Bag:
➀ BEND FLAPS FORWARD |
| ➁ PLACE BAG FLANGE |
|
| ON TOP OF SHELF |
|
|
|
|
|
|
➂ PUSH BAG INTO HOUSING |
➂ |
➃ |
➃ POSITION BAG BOTTOM |
BEHIND RIBS |
Reinstalling the Dust Bag Cover:
Place the bottom of the dust bag cover on cleaner lining up grooves on outer edge of cover with rails on side of cleaner. Rotate cover up, pressing against cleaner until it locks into place.
Rails on |
Cleaner |
Grooves on |
inside edge |
of bag cover |
6
