How to Assemble and Use (continued)
95
5. Insert hose coupling into front of canister.
7
7.Step on motorized nozzle to release handle; pull back to comfortable work position.
9
Motorized | Nozzle | ❋ |
96
6.Pull cord out until fully extended, and push plug into outlet. To rewind, step on Cordaway cord reel button, hold and guide plug while it rewinds.
98 | On/Off Canister Switch |
8.Push On/Off canister switch.
(A thermostat automatically shuts off the motor if it overheats, see Thermal Cut Off.)
109 Only with Model 6996
Red | Green | |
Light | Light | |
Must install |
| |
9 V | ❋ | |
9V Battery | ||
|
9.Bare floor or carpet cleaning selection on remote control, only.
10.Red light indicates dirt, dust, etc. is still being removed from the area being cleaned. The green light indicates the area is clean and to move on to the next area.
NOTE: Dirt sensor works most effectively when suction control regulator on canister and vacuum control on handle are both on HIGH.
HINT: New carpeting has loose carpet fibers which will activate the red light sensor beam.
7