HOW TO USE (continued)
2Pull the crevice tool out of the base of the cleaner.
Hint: Some fine particles can restrict airflow very quickly and will decrease performance even before the dust container appears full. For that reason, when vacuuming carpet fresheners or cleaners, powder, plaster dust or similar fine substances, the dust cup and filter may need cleaning more often.
Dust Cup and Filter
Open
Cup
1 Pull back on the power switch to the "open cup" position and lift dust cup away from cleaner.
3 Place the crevice tool on the end of the hose.
4 When cleaning is completed, store crevice tool back in the base of the cleaner and replace the hose in the hose adapter on the cleaner.
HOW TO MAINTAIN
The instructions given in this booklet serve as a guide to routine maintenance. To avoid unnecessary service calls, check the hose, dust cup and motor filter often. Clear a clogged hose, empty the dust cup if it is full, and clean the motor filter when it is dirty.
CAUTION: Turn off the power switch and unplug the electrical cord before emptying the dust cup or cleaning the dust cup filter.
CAUTION: Do not use the cleaner without the dust cup filter properly installed. This can damage the cleaner.
2Remove dust cup filter and dump dust cup in a waste container.
The dust cup filter can be cleaned by brushing off over a waste container. Do not allow to get wet.
The dust cup can be rinsed under running water and completely dried before replacing on cleaner. We do not recommend putting it in a dishwasher.
3Replace dust cup filter in dust cup.
4Put bottom edge of dust cup in cleaner as shown above and rotate down against cleaner firmly. Dust cup latch will automatically lock.
4
