HOW TO USE
CAUTION: Moving parts, make sure on/off switch is in off position before plugging in.
CAUTION: Never leave plugged in cleaner unattended.
An upright vacuum cleaner will clean any type of carpet. Do not place cleaner on furniture or steps as the brush roll may cause damage.
Cord Clip
POWER
2
1
1
POWER
4
5
1.Adjust cleaner height setting to lowest position for maximum cleaning. Adjust to a higher setting to make pushing easier. For easy adjustment, tilt the cleaner back to move setting knob.
2.Place electrical cord out of the way on the cord clip while vacuuming or storing.
Cleaner Height Setting
WARNING: Avoid injury. Keep loose clothing, hair, fingers, and all other parts of body away from any moving part (such as the revolving brush). Turn off the switch and unplug the cleaner before changing the cleaner height setting.
The front of the cleaner has an adjustment that raises or lowers the cleaner base to match the type of carpet. With the cleaner cord unplugged, set the adjustment to lowest setting for maximum cleaning. If the cleaner is difficult to push, move adjustment to next highest setting until cleaner is comfortable to push. The brush roll must reach the carpet for effective cleaning.
Make each adjustment with cleaner switch off and cord disconnected from outlet. For ease in moving the adjustment knob, place handle in operating position and tilt cleaner back to remove weight from front wheels.
3.Plug electrical cord into outlet.
Operate
Clean
Handle Under
Release
4.Step on handle release. Pull handle back to a comfortable position.
5.Push On or Off power switch.
5
