HOW TO USE
Power Switch
1.Push the power switch down to turn on; push up to turn off.
2.Select type of cleaning. Carpet cleaning starts the brush roll turning. Bare floor cleaning
stops the brush roll.
Off | Nozzle with Edge Kleener® |
Floors | The nozzle turns down for regular or |
Carpets | low profile cleaning. Airflow under |
| the nozzle automatically directs |
| suction to the edges and corners for |
| maximum full width cleaning. |
Dual Uses
To operate as a handvac remove the handle by releasing the lock button.
To operate as a stick vac attach the handle.
Lock
Button
HOW TO MAINTAIN
The instructions given in this booklet serve as a guide to routine maintenance. Keep the cleaner operating at top efficiency. Empty the dust cup after each use.
Empty Dust Cup
Dust Cup
Latch
1.Slide dust cup latch up.
2.Pull dust cup from handle section and lift from the nozzle.
3.Pull the filter out of the dust cup, shake contents of dust cup into a waste container. (To clean dust cup filter refer to dust cup filter section.)
4.To replace dust cup, fit dust cup down into nozzle.
5.Gently squeeze the sections together until the dust cup latch locks the cup in place.
7
