Euro-Pro EP033 How To Operate Your Hand Vacuum, Changing & Cleaning The Dust Cup Filter, Problem

Models: EP033

1 4
Download 4 pages 24.88 Kb
Page 3
Image 3
HOW TO OPERATE YOUR HAND VACUUM

HOW TO OPERATE YOUR HAND VACUUM

1.Hold the hand vacuum firmly with your hand on the Handle (4).

2.Push the On/Off Power Switch (2) to “On” position.

3.Start vacuuming.

CAUTION: The Hand Vacuum is a very powerful unit. Make sure that you hold it firmly, otherwise it can slip out of your hand and cause injury.

CHANGING & CLEANING THE DUST CUP FILTER

Warning: Always unplug from electrical outlet before opening the Dust Cup (container) (10).

1.To open the Dust Cup (container) (10), push button (1) and pull out the Dust Cup (container ) (10), (fig. 1).

2.Pull out the Dust Cup Filter (8), (fig. 2).

3.Empty the dust from the Dust Cup Filter (8).

4.Rinse the Dust Cup Filter (8) in cold water, and then wait until it dries up before replacing it into the Dust Cup (container) (10).

5.Place the Dust Cup Filter (8) carefully into the Dust Cup (container) (10).

6.Attach the Dust Cup (container) (10) to the Hand Vacuum.

Fig. 1

Fig. 2

CAUTION: The suction hole (3) must be open, free of any obstructions at all times. Otherwise, the motor will overheat and could get damaged.

TROUBLESHOOTING GUIDE

PROBLEM

 

POSSIBLE REASON

POSSIBLE SOLUTION

 

 

 

 

 

 

1.

Power cord not firmly

1.

Plug unit in firmly.

 

2.

Check fuse or breaker.

HAND VACUUM WILL

 

plugged into outlet.

 

 

Replace fuse/reset

NOT OPERATE

2.

No power in wall outlet.

 

 

breaker.

 

3.

Needs servicing.

 

 

 

Call 514-842-8691

 

 

 

 

 

 

 

 

 

 

 

 

1.

Empty dust cup filter –

 

 

 

 

(see page 4).

HAND VACUUM WILL

1.

Dust cup filter is full.

2.

Turn unit off and unplug

 

from wall outlet. Remove

NOT PICK-UP OR

2.

Unit clogged.

 

 

dust cup filter and check

SUCTION POWER IS

3.

Dust cup filter needs

 

 

for object(s) in air duct

WEAK

 

cleaning.

 

 

 

and remove.

 

 

 

 

 

 

 

3.

Clean or replace dust cup

 

 

 

 

filter. (see page 4).

 

 

 

 

 

DUST ESCAPING

1.

Dust cup filter is full.

1.

Empty dust cup filter.

2.

Dust cup filter is not

2.

Review dust cup filter

FROM HAND

 

installed correctly.

 

instructions. (see page 4)

VACUUM

3.

Puncture/hole in dust cup

3.

Replace dust cup filter.

 

 

filter.

 

(see page 4)

 

 

 

 

 

HAND VACUUM HOSE

 

 

1.

Remove hose and/or

1.

Hose clogged.

 

bushes. Remove

OR BRUSHES WILL

 

obstruction from hose.

2.

Dust cup filter is full.

 

NOT PICK-UP

2.

Empty and clean dust cup

 

 

 

 

 

 

filter.

 

 

 

 

 

4

5

Page 3
Image 3
Euro-Pro EP033 How To Operate Your Hand Vacuum, Changing & Cleaning The Dust Cup Filter, Troubleshooting Guide, Problem