Upright Vacuum
15
1. | Upper Handle | 9. | Exhaust Filter |
2. | Flexible Hose | 10. | Front Panel |
3. | Main Body | 11. | Full Bag Indicator |
4. | Dusting Brush | 12. | On/Off Switch |
5. | Hose Connector | 13. | Lock Plate |
6. | Crevice Nozzle | 14. | Motorized Power Head |
7. | Nested Extension Tubes (2) | 15. | Handle Release |
8. | Carpet Height Adjustment Knob | 16. | Head Light |
Technical Specifications
Voltage: | 120V~ 60Hz. |
Power: | 12 Amps |
5.Changing the Head Light Bulb:
Warning: Always disconnect from power source when servicing or cleaning the unit. Failure to do so could result in electrical shock or personal injury from cleaner suddenly starting.
•Turn unit “Off” and unplug from wall outlet.
•Use a Phillips screwdriver and remove the two screws from the back of the motorized power head cover.
•Remove the two screws from the bottom of the motorized power head.
•With the base cover removed, remove the old light bulb and discard. Insert new bulb into the socket and twist clockwise.
•Replace the two screws from the bottom of the motorized power head and then replace the cover. Then replace the two screws from the back side of the motorized power head.
Note: Always replace the light bulb with the same or smaller wattage size (12V 4W) to prevent damage to the surrounding parts.
1 | 6 |