Assembling Your Vacuum Cleaner
NOTE: Always remove the power plug from the wall outlet before assembling or removing accessories.
1.Attaching the Flexible Hose into the Vacuum
Connect the flexible hose into the air intake duct. Push in until you hear a “click”, indicating it is in its position.
To remove the flexible hose, reverse the operation.
2.Fitting the Chrome Telescopic Tube to the Curved Wand / Hose Extension
Push the chrome telescopic tube into the curved wand / hose extension, as shown in the illustration.
3.Extending the Chrome Telescopic Tube
Push forward the plastic knob and pull the smaller tube outward.
Plastic Knob
Fitting the Floor Brush to the Telescopic Tube
Push the telescopic tube into the Floor brush, as shown in the illustration.
4
Using the Cleaning Tools
1.Crevice Tool
For radiators, crevices, corners, baseboards and between cushions.
2.Dusting Brush
The dusting brush is used for the furniture, venetian blinds, books, lamp shades and shelves.
Deluxe Air Driven Turbo Brush
The Deluxe Air Driven Turbo Brush is a deluxe floor attachment with a rotating brush turned by the air flow of the vacuum cleaner. The Turbo Brush is used for cleaning high pile carpets or whenever agitation of the carpet fibers is required. The Turbo Brush should NOT be used on hard floors.
Using the Deluxe Air Driven Turbo Brush
•Turn off the vacuum and unplug from wall outlet.
•Attach the Deluxe Air Driven Turbo Brush to the telescopic tube.
•
•The Air Driven Turbo Brush is adjustable for carpet nap. To adjust for high pile carpet, move the slide control on top of the brush housing as shown in Fig. 1.
•For low nap adjust the slide control as shown in fig. 2.
Fig. 1 | Fig. 2 |
Slide | Slide |
For high pile carpet | For low nap carpet |
WARNING: The beater brush of this floor attachment rotates very fast. To avoid injury,
DO NOT TOUCH the beater brush with fingers while the brush is rotating.
5
