OPERATING INSTRUCTIONS
OPERATING INSTRUCTIONS
Connecting the Detachable Power Supply Cord
Your deep fryer has been specifically designed with your safety in mind. This unit has a unique detachable power supply cord. This power supply cord is designed to “Break Away” from the fryer body in the event that the supply cord is inadvertently pulled. This is intended to prevent the tipping of the appliance and hazardous spillage of hot oil.
The female receptacle portion of the power supply cord is permanently attached to the rear of the the control panel. To connect the male power cord plug to the female receptacle on the appliance, orient the male plug so that it mates with the female receptacle. The male plug can only be inserted one way. If the male plug will not go into the receptacle on the appliance, rotate the male plug 180° and insert again.
Important: Should the male plug become detached from the appliance during use, it is important to:
1.Unplug the power cord from the wall outlet.
2.Turn off the appliance at the control panel.
3.
4.
5.Turn the appliance back on.
Cleaning Instructions Warning: Always remove the plug
from the wall socket before cleaning. Allow the deep fryer and the oil to cool completely (approximately 2 hours) before cleaning. Never immerse the control panel, cord or plug in water or
any other liquid.
•Follow the cleaning instructions on page 4. (Before using for the First Time)
•Never immerse the control panel, cord or plug in water or any other liquid.
•Do not place the control panel, cord or plug in the dishwasher.
•Clean the control panel only with a damp cloth.
•The oil container, frying basket, lid cover and filter can be washed in the dishwasher.
•The body of the deep fryer can be washed in warm soapy water. Do not put the body of the deep fryer in the dishwasher.
How To Reset the Deep Fryer
If for some reason the deep fryer stops heating, the reason might be that the safety reset switch has disconnected. To reconnect the the deep fryer, follow the instructions listed below:
•Push the thermostat reset button located on the back of the control panel. (Fig. 8) The unit will beep to
indicate that it has
Reset
IMPORTANT
Helpful Hints
Your deep fryer is equipped with a special
You can
The temperature control allows you to set the desired temperature for each recipe. Once the temperature is achieved, the ready light will turn on. This is the point to set your timer. Once the time has elapsed, the element will shut off and the oil begin to cool down. If you want to do another recipe, simply press the function reset button, set your temperature and wait for the ready light. Once the ready light is illuminated, then set the timer.
If you would like to use the fryer continuously for multiple batches, do not set the timer. Simply set the desired temperature, wait for the ready light and begin!
RESET
Fig. 8
9 | 10 |