Euro-Pro F1068 Contents, Connecting the Detachable Power Supply Cord, Cleaning Instructions

Models: F1068

1 6
Download 6 pages 20.43 Kb
Page 3
Image 3
CONTENTS

OPERATING INSTRUCTIONS

CONTENTS

Connecting the Detachable Power Supply Cord

Your deep fryer has been specifically designed with your safety in mind. This unit has a unique detachable power supply cord. This power supply cord is designed to “Break Away” from the fryer body in the event that the supply cord is inadvertently pulled. This is intended to prevent the tipping of the appliance and hazardous spillage of hot oil.

The female receptacle portion of the power supply cord is permanently attached to the rear of the the control panel. To connect the male power cord plug to the female receptacle on the appliance, orient the male plug so that it mates with the female receptacle. The male plug can only be inserted one way. If the male plug will not go into the receptacle on the appliance, rotate the male plug 180° and insert again.

Important: Should the male plug become detached from the appliance during use, it is important to:

1.Unplug the power cord from the wall outlet.

2.Turn off the appliance at the control panel.

3.Re-attach the power cord to the appliance.

4.Re-connect to power outlet.

5.Turn the appliance back on.

Cleaning Instructions

Warning: Always remove the plug from the wall socket before cleaning. Allow the deep fryer and the oil to cool completely (approximately 2 hours) before cleaning. Never immerse the control panel, cord or plug in water or

any other liquid.

Follow the cleaning instructions on page 4. (Before using for the First Time)

Never immerse the control panel, cord or plug in water or any other liquid.

Do not place the control panel, cord or plug in the dishwasher.

Clean the control panel only with a damp cloth.

The oil container, frying basket, lid cover and filter can be washed in the dishwasher.

The body of the deep fryer can be washed in warm soapy water. Do not put the body of the deep fryer in the dishwasher.

How To Reset the Deep Fryer

If for some reason the deep fryer stops heating, the reason might be that the safety reset switch has disconnected. To reconnect the the deep fryer, follow the instructions listed below:

Push the thermostat reset button located on the back of the control panel. (Fig. 8) The unit will beep to indicate that it has re-set.

Connecting the Detachable Power Supply Cord Reset

Important Safeguards ………………………………………………………….. 1

Special Safety Instructions ……………………………………………………. 1

Main Components ……………………………………………………………... 3

Using for the First Time …………….…………………………………………. 4

Prior to First Use, Clean the Unit Thoroughly …….…………………………. 4

Filling the Stainless Steel Container With Oil …………..……………………. 4

Using Solid Fat …………..……………………………………………………… 5

Installing the Control Panel Into Its Place ……..……………………………... 5

Using the Electronic Deep Fryer ………………………………………………. 5

Pre-Heating ………………….………………………………………………….. 6

Filling the Frying Basket ……….………………………………………………. 7

Frying Food …………………………………….……………………………….. 7

At the End of Cooking ………………….………………………………………. 7

Frying Tips ……………………………..………………………………………... 7

Temperature Settings ………………………………………………………….. 8

Filtering and Changing the Oil ………………………………….…………….. 8

Connecting the detachable Power Supply Cord ……………………………. 9

Cleaning Instructions ……………………….………………………………….. 9

How to Reset the Deep Fryer …………………………………………………. 9

Helpful Hints …………………………………………………………………….. 10

RESET

Fig. 8

92

Page 3
Image 3
Euro-Pro F1068 Contents, Connecting the Detachable Power Supply Cord, Cleaning Instructions, How To Reset the Deep Fryer